[sdiy] Vertical PCB Mount Pots (With panel mount)... Any options?!

[Tom Wiltshire]

With most pots that only works if you're mounting them on the edge of the PCB, but I guess you could cut holes if you wanted them in the centre. Still, if small bear have them for $1, what's the point in messing about?

T.
 
On 27 Aug 2010, at 12:16, cheater cheater wrote:

> You take normal pots and bend the legs.
> 
> Cheers,
> D.
> 
> On Fri, Aug 27, 2010 at 09:50, Mike Beauchamp <mikebeauchamp at gmail.com> wrote:
>> I was thinking for my next project of doing PCB mounted pots to save
>> on some soldering, but the only ones I've seen would orient the board
>> perpendicular to the panel. I'd like to use some PCB mounted pots that
>> mount vertically so the PCB and panel are parallel.
>> 
>> So, does anyone have a favourite vertical pcb mount pot with threads
>> to mount onto a panel? It has to be synth worthy too.. previously I've
>> been happy with Alpha pots at the very least. I've found a few online,
>> but only rather small with plastic shafts. I'll probably just need
>> 10K, 100K, 1M in linear and log. The only worthy candidates I've seen
>> are the ones in my old Deluxe Memory Man :)
>> 
>> Thanks guys!
>> 
>> Mike
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy