[sdiy] Lazertran ROCKS!!

[Needham, Alan]

I use Lazertran INKJET paper with HP300 inkjet cartridges, a half-hour
drying time before soaking the paper.
The water-slide transfer is easy to handle (but heavy ink lines can tend
to smudge if you rub them) and will slide for a couple of minutes.
The transfer dries with a milky paper colour (several hours), but goes
transparent with a coat of acrylic varnish - I use stuff from the local
auto factors.
I guess for us the surface will always be flat but their demo CD shows
all sorts of surface shapes being covered.

Just my tuppence worth,
		Alan

| -----Original Message-----
| From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
| bounces at dropmix.xs4all.nl] On Behalf Of Thomas Strathmann
| Sent: 26 August 2010 21:09
| To: synth-diy at dropmix.xs4all.nl
| Subject: Re: [sdiy] Lazertran ROCKS!!
| 
| On 8/26/10 09:04 , David G. Dixon wrote:
| > I just did my first panel with Lazertran.  I was kinda scared
because
| the
| > stuff is fairly expensive (about $35 for 10 sheets) and I was
concerned
| that
| > it was going to be weak and hard to manipulate.  However, it's
actually
| > pretty tough and very easy to arrange in place on the panel.
| 
| Which printer did you use? I wonder whether a Laserjet 2200 would
work.
| It's not explicitly listed on the Lazertran site.
| 
| 	Thomas
| _______________________________________________
| Synth-diy mailing list
| Synth-diy at dropmix.xs4all.nl
| http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy,distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).

The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

A Centrica business British Gas Services Limited is authorised and regulated by the Financial Services Authority for its insurance mediation activities.

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England No 3141243.  

Centrica plc

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England and Wales No 3033654