[sdiy] Remember Paia's rackmount boxes?

[Harry Bissell]

these are nice...

http://www.wolgrammfg.com/products/ruSeries.html

H^) harry

----- Original Message -----
From: David Griffith <dgriffi at cs.csubak.edu>
To: Tom Wiltshire <tom at electricdruid.net>
Cc: Synth DIY <Synth-diy at dropmix.xs4all.nl>
Sent: Mon, 16 Aug 2010 16:01:28 -0400 (EDT)
Subject: Re: [sdiy] Remember Paia's rackmount boxes?

On Mon, 16 Aug 2010, Tom Wiltshire wrote:

> Sorry David, I'm not quite clear, are you looking for 19" rack enclosures?
>
> If so, there are loads available:
>
> 	http://www.hammondmfg.com/racks.htm
> 	http://www.gbeelectronics.com/gbe/index.php?page=shop.browse&category_id=802&option=com_virtuemart&Itemid=72
> 	http://www.maplin.co.uk/Module.aspx?ModuleNo=34159&C=Froogle&U=34159&T=Module
>
> If this isn't it, what exactly was different about the Paia ones?

These were very inexpensive things without a front panel.  Three flat 
pieces and two "tops", each of which had three 90 degree bends. Here's one 
in the process of being made into a Midibox SID: 
http://661.org/images/paia_2u.jpg.  The extruded right-angle pieces were 
added by me.  I'd make one myself if I had a box and pan brake.


-- 
David Griffith
dgriffi at cs.csubak.edu

A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

-- 
Harry Bissell & Nora Abdullah 4eva