[sdiy] 808 bass pcb?

[David Moylan]

I ordered a BD88 bare PCB from Analogue Solutions.  They were nice to 
deal with.  Depending on the end format you might just by a whole 
module; they're listed for 59 pounds on the website.  I've populated the 
PCB but haven't finished the module yet, however it's getting close to 
the top of my list.

Dave



legion at helpwantedproductions.com wrote:
> Forgive me if this has been covered before. I have done some searches and
> eneded up at electro-music threads as well as the 808 project but have yet
> to find one.
> 
> I'm looking for a simple 808 tom or bass drum PCB to build a DIY module. I
> see that metalbox.com offers an 808 module but there is no correspnding
> CGS pcb so I'm not sure if this a one-off or other company piece.
> 
> The bigger picture is I made a CGS dual Drum module in Modcan A format and
> have plenty of panel space for an additional module. I figure an 808 sound
> would complement it nicely but if there is a similar small PCB for any
> other analog type percussion sound I'm all ears. (I'm aware of the CgS
> dual chime and am looking for something else and the Cynare is too complex
> to add to this single panel).
> 
> Thanks for any/all help!
> 
> 
> 
>