[sdiy] 808 bass pcb?

[Amos]

I recall Thomas Henry having an impressive drum module on the
electro-music forum; might be worth a search.

On Saturday, August 14, 2010,  <legion at helpwantedproductions.com> wrote:
> Forgive me if this has been covered before. I have done some searches and
> eneded up at electro-music threads as well as the 808 project but have yet
> to find one.
>
> I'm looking for a simple 808 tom or bass drum PCB to build a DIY module. I
> see that metalbox.com offers an 808 module but there is no correspnding
> CGS pcb so I'm not sure if this a one-off or other company piece.
>
> The bigger picture is I made a CGS dual Drum module in Modcan A format and
> have plenty of panel space for an additional module. I figure an 808 sound
> would complement it nicely but if there is a similar small PCB for any
> other analog type percussion sound I'm all ears. (I'm aware of the CgS
> dual chime and am looking for something else and the Cynare is too complex
> to add to this single panel).
>
> Thanks for any/all help!
>
>
>
>
> --
>      ---------------------------------------
>      NEW DAED SITE!!  -  Http://DaedSound.com
>  DAED: Circuit Bent and Unusual Sound Devices
> "Making Something Extrodinary from the Ordinary"
>
>       Music and More at the Mothership:
>     Http://www.HelpWantedProductions.com
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>