[sdiy] AC coupling caps on MS20 clone

[megaohm]

On Sat, Aug 7, 2010 at 1:48 PM, David G. Dixon <dixon at interchange.ubc.ca> wrote:
>
> Well, I've just simulated it, and a blocking cap works just fine between the
> input resistors and virtual ground.  In fact, a smaller capacitor does the
> same job here than on the summer output.  I will rearrange my PCB layout
> accordingly.  Thanks for the tip, megaohm!
>
>

Full disclosure: The first time I remember seeing this was in the
input mixer of the MOTM 440 VCF.