[sdiy] Serge SSG @ 15V?

[Derek Holzer]

Ladies and Gentlemen,

I recently picked up a populated Serge SSG board on EBay, and I am in 
the process of adding the hardware and creating a panel. The system I 
will put this module in runs on +/-15V, while the Serge stuff runs at 
+/-12V. I don't have access to a schematic of the SSG, so I can only 
guess if there are any parts which would need to be tweaked to get it 
running on that voltage level. Is there anything I should worry about in 
there? My guess is that, since there's no V/Oct stuff going on that it 
shouldn't matter too much.

Best,
Derek
[pls CC me any replies]
-- 
::: derek holzer ::: http://macumbista.net :::
---Oblique Strategy # 6:
"Abandon normal instruments"