[sdiy] BLIT/BLEP virtual analogue synthesis
Eric Brombaugh
ebrombaugh1 at cox.net
Wed Aug 4 23:33:00 CEST 2010
On 08/04/2010 02:13 PM, Olivier Gillet wrote:
>
> To all: which entry-level FPGA dev boards do you recommend - knowing
> that I'd rather use a development environment that works on OS X or
> Linux? Any good book/resource to get started on VHDL/verilog?
The Avnet board Scott mentioned is probably the best deal going these
days. If you're interested in a bit more on-board I/O then you might try
looking at the offerings from Digilent:
http://www.digilentinc.com/
In particular the Nexsys boards are a pretty good deal for what you get,
and they have plenty of I/O boards including DACs, ADCs, displays, etc.
As far as development tools that work on MacOS or Linux: I'm not aware
of any FPGA tools that work on MacOS X. Both Xilinx and Altera tools
work on Linux though, although IIRC the Altera Linux tools are not free.
The Xilinx free Webpack does work on 32-bit Linux though - I'm running
it on Ubuntu 9.10 - and it supports most of the Spartan 3E and 3A parts.
Eric
More information about the Synth-diy
mailing list