[sdiy] minimoog board dimensions

[Graham Atkins]

JR,

Are you really saying you can measure to 0.01 of a millimetre from a  
photo ?

Get real !!!

Graham

On 1 Aug 2010, at 18:02, JR wrote:

> Hi David,
>
> I don't have any actual regulator or rectifier boards, but utilizing
> this photo of the regulator board:
>
> http://www.fantasyjackpalance.com/fjp/sound/synth/002/mini-board-3-1.jpg
>
> ...and some known dimensions for a couple of the components on the
> board, I came up with a size of
>
> 169.97mm X 108.79mm for the main part of the board, and the fingers
> would be 6.22mm tall by 79.08mm wide, offset from the left edge by
> 30.41mm.
>
> I'll be anxious to hear what the actual dimensions you receive from
> someone else are, since it will help validate or invalidate the photo
> projection method I used.  I may redo a couple of my boards to bring
> them together (instead of separating everything by circuit), and I'd
> like to be exact as well.
>
> What would be really interesting would be for someone to take all the
> boards, lay them out in their exact original design, and then combine
> those separate boards into a single board that could be fabricated on
> demand and then cut to form the originals (to keep the cost low).
>
> --Joe R.
>
> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
>
>
>
> On Sat, Jul 31, 2010 at 10:31 PM, David Griffith <dgriffi at cs.csubak.edu 
> > wrote:
>>
>> I'm about halfway done laying out the power and rectifier minimoog  
>> boards.
>> Does anyone have measurements of the boards they can send me?
>>
>> --
>> David Griffith
>> dgriffi at cs.csubak.edu
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy