[sdiy] My new 6 voices MIDI interface..

[Karl Ekdahl]

What do you use to cut out the holes etc. in the vinyl? 

--- Den tis 2010-04-13 skrev Jean-Pierre Desrochers <jpdesroc at oricom.ca>:

> Från: Jean-Pierre Desrochers <jpdesroc at oricom.ca>
> Ämne: Re: [sdiy] My new 6 voices MIDI interface..
> Till: synth-diy at dropmix.xs4all.nl
> Datum: tisdag 13 april 2010 16:21
> 
> > The adhesive vinyl is very nice. 
> 
> Thanks
> 
> > Is that laser or ink jet printing ?
> 
> Laser printing on vinyl.
> Please note that the auto adhesive vinyl is not
> suffisiant for 'hardness' and need to be laminated
> with a transparent heat transfered plastic type laminate
> on top of it.
> Then the overall layout won't stretch when
> applied to the aluminium plate to be punched.
> And the top laminate is scratch proof too.
> 
> JP
> 
>  On Tue 13/04/10 05:02 , Andre Majorel aym-htnys at teaser.fr
> sent:
> > On 2010-04-12 09:21 -0400, Jean-Pierre Desrochers
> wrote:
> > 
> > > Construction and assembly using auto adhesive,
> > laminated vinyl> for front panel layout placed on
> front aluminium
> > plate and a> table press punch for all holes:
> > > http://membre.oricom.ca/jpdesroc/projets/Modular/MIDI_Interface
> > /Module%20pictures/
> > The adhesive vinyl is very nice. Is that laser or ink
> jet printing ?
> > 
> > -- 
> > André Majorel http://www.teaser.fr/~amajorel/_______________________________________________
> > Synth-diy mailing list
> > S
> > ynth-diy at dropmix.xs4all.nlhttp://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> > 
> > 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 

__________________________________________________
Använder du Yahoo!?
Är du trött på spam?  Yahoo! E-post har det bästa spamskyddet som finns 
http://se.mail.yahoo.com