[sdiy] Outamp in?

[cheater cheater]

It's not uncommon for synths to have a 'mix through' jack, for example
the TB303 - it's so that the keyboard player doesn't have to lug
around mixers with him, those things were big AND expensive...

D.

On Tue, Apr 6, 2010 at 20:10, Terje Winther
<terje.winther at wintherstormer.no> wrote:
> In the original Oberheim SEM there is a 3-pin connection in the VCA section,
> I1 to I3.
> I1 is VCA out, and I2 is ground, and both of these are used in the
> standalone version as well as in the 2-voice, 4-voice and 8-voice versions,
> so that is all good.
> However, I cannot find any reference to how I3 called "Outamp in" is
> supposed to be used. It is a connection from outside of the SEM to hook up
> just before the final buffer, but after the SEMs VCA control (CA3080), so
> anything you connect here will not be controlled by the SEM, just added to
> whatever is present on the output.
> Is there anyone who knows anything about this?
>
> Terje Winther
> terje.winther at wintherstormer.no
> http://www.wintherstormer.no/
>
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>