[sdiy] Juno 60 -- issue..only patch 11?

[Bob Weigel]

you see what they're going for of late? :-) One sold for 1100 the other 
day and I just sold another for 900 that had a few low profile scuffs.  
The membrane switches are the same type as the cheap yamaha ce20 uses... 
-Bob

cheater cheater wrote:

>Ugh. If anything, sounds like a parts machine. Think if it's worth
>your headache.
>
>D.
>
>On Fri, Apr 2, 2010 at 11:54, Bob Weigel <sounddoctorin at imt.net> wrote:
>  
>
>>Hey all thanks for the thoughts.  I actually discovered after replacing
>>memory chips to no avail that there are intermittent results hitting some
>>other buttons.  In fact it seems 1, 4, 7 on the bottom will get a response
>>and if I get 4 up on the banks..then *all but 8* will work!  So I think we
>>have a combination of bad buttons and possibly a bad data line or something
>>here.   The buttons measue several hundred ohms and I was thinking they were
>>the tacticle ones and hit some deoxit on one.  Bad mistake.  THey're the
>>kind with carbon/silicon rubber in a tiny little disk.  My contact disks
>>barely fit int he hole there but the one I sprayed swelled a bit and in
>>trying to get it back in the hole a delicate stretch of it cracked on top.
>> Arghh.  I'm trying to recall what else used those that I might have scrap.
>> I've seen them before in something else.  I'll sleep on it.
>>
>>
>>Ryan Powers wrote:
>>
>>    
>>
>>>I've owned a few of these - if there are any power issues, the board  will
>>>reset to the manual patch - sometimes it is external - like  having a space
>>>heater plugged into the same outlet.
>>>
>>>
>>>On Apr 1, 2010, at 2:57 PM, cheater cheater wrote:
>>>
>>>      
>>>
>>>>That's a crazy bug if i've seen one. Staying tuned, this will turn out
>>>>interesting.
>>>>
>>>>On Thu, Apr 1, 2010 at 21:40, Bob Weigel <sounddoctorin at imt.net>  wrote:
>>>>
>>>>        
>>>>
>>>>>Very peculiar.  Has anyone ever seen it where you punch in a patch  and
>>>>>it
>>>>>just reverts to manual mode after a brief flash of the patch number  you
>>>>>are
>>>>>selecting maybe?  patch 11 works..its the only one of all the  buttons
>>>>>I've
>>>>>tried so far.  If it's bad memory chips I have a lot of them :-).
>>>>>_______________________________________________
>>>>>Synth-diy mailing list
>>>>>Synth-diy at dropmix.xs4all.nl
>>>>>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>>>
>>>>>          
>>>>>
>>>>_______________________________________________
>>>>Synth-diy mailing list
>>>>Synth-diy at dropmix.xs4all.nl
>>>>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>>        
>>>>
>>>
>>>      
>>>
>
>
>  
>