[sdiy] Juno 60 -- issue..only patch 11?

[Bob Weigel]

Hey all thanks for the thoughts.  I actually discovered after replacing 
memory chips to no avail that there are intermittent results hitting 
some other buttons.  In fact it seems 1, 4, 7 on the bottom will get a 
response and if I get 4 up on the banks..then *all but 8* will work!  So 
I think we have a combination of bad buttons and possibly a bad data 
line or something here.   The buttons measue several hundred ohms and I 
was thinking they were the tacticle ones and hit some deoxit on one.  
Bad mistake.  THey're the kind with carbon/silicon rubber in a tiny 
little disk.  My contact disks barely fit int he hole there but the one 
I sprayed swelled a bit and in trying to get it back in the hole a 
delicate stretch of it cracked on top.  Arghh.  I'm trying to recall 
what else used those that I might have scrap.  I've seen them before in 
something else.  I'll sleep on it. 



Ryan Powers wrote:

> I've owned a few of these - if there are any power issues, the board  
> will reset to the manual patch - sometimes it is external - like  
> having a space heater plugged into the same outlet.
>
>
> On Apr 1, 2010, at 2:57 PM, cheater cheater wrote:
>
>> That's a crazy bug if i've seen one. Staying tuned, this will turn out
>> interesting.
>>
>> On Thu, Apr 1, 2010 at 21:40, Bob Weigel <sounddoctorin at imt.net>  wrote:
>>
>>> Very peculiar.  Has anyone ever seen it where you punch in a patch  
>>> and it
>>> just reverts to manual mode after a brief flash of the patch number  
>>> you are
>>> selecting maybe?  patch 11 works..its the only one of all the  
>>> buttons I've
>>> tried so far.  If it's bad memory chips I have a lot of them :-).
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>
>