[sdiy] strange strange SAJ110 divider issue?

[Bob Weigel]

I tested a whole bunch of SAJ110's in the crumar organ we just did.  
They work perfectly in there.  So ...I finally pulled the old solina 
string ensemble back out.  Put a tested chip in a socket I'd installed 
that was on a problem chip location (number 4).  The...same divider on 
pin 11 is still garbled. 

I can unhook the whole trace!  Still..the..same garbled sound.  I have 
-10V instead of the -12V the diagram says should be there. However the 
DOCS on the chip say absolute max rating is -11V there!  It's smooth.  
No ripple or fuzz visible on the scope.

All the other outputs seem to be working fine on that chip.  Though 
other dividers are also having problems.  Very puzzling.  Has anyone 
ever seen a phenomena like this? I mean it's clearly dividers that work 
in another machine so something about the power supply would seem the 
logical first guess but is it possible there's something I'm not seeing 
just causing one line to do that on every chip I put in there?? Cap 
esr's seem fine.  I even paralelled another cap just to be sure...-Bob