[sdiy] USB/MIDI ground isolation?
Rainer Buchty
rainer at buchty.net
Fri Sep 18 11:18:46 CEST 2009
On Thu, 17 Sep 2009, Neil Johnson wrote:
> Yes, because its cheaper. MIDI over USB is a cheap hack designed for
> low-cost consumer devices, where cost is more important than audio
> integrity. If you want to break the ground loops there are several
> ways, from USB opto-isolators (very expensive), audio transformers
> (mildy expensive) to cheap tricks such as ground-lift with a
> lowish-value resistor.
While we're talking about hacks, what about
USB-MIDI -> USB2MIDI -> MIDI2USB -> USB-MIDI
Rainer
More information about the Synth-diy
mailing list