[sdiy] Frequency Counter advice...

David Ingebretsen dingebre at 3dphysics.net
Wed Sep 16 05:02:14 CEST 2009


Mundane things like volts, ohms, farads, semi conductors, temperature, etc.,
trouble shooting like any other volt meter. But the precision gives me 1/10
of a milivolt readings, so it helps with calibrating VCO's, Midi 2 CV, and
other voltage sources. 

David

~~ -----Original Message-----
~~ From: David G. Dixon [mailto:dixon at interchange.ubc.ca]
~~ Sent: Tuesday, September 15, 2009 7:22 PM
~~ To: 'David Ingebretsen'; 'SDIY List'
~~ Subject: RE: [sdiy] Frequency Counter advice...
~~ 
~~ So, what do we use these doodads for?
~~ 
~~ 
~~ > I've been using my Extech MM570 multimeter, clearly not as good as
Paul's
~~ > Fluke/Philips PM6666 :), but a good tool. Not cheap, but not so
expensive
~~ > that it's impossible to justify for personal use. About $300.00 new on
the
~~ > net for the non NIST certified version.
~~ >
~~ > FREQUENCY, AC LINE LEVEL:
~~ > 		Range 5.0000Hz to 200.000kHz
~~ > 		Accuracy 0.002% + 4d
~~ > 		Sensitivity:
~~ > 			500mV range 0.1V min
~~ > 			5V range 1V min
~~ > 			50V range 10V min
~~ > 			500V range 100V min
~~ > 			1000V range 900V min
~~ >
~~ > The meter itself is a decent volt/ohm/capacitance meter, too.
~~ >
~~ > 0.03% basic DCV accuracy
~~ > 50,000 count display with 500,000 counts for DCV and Hz
~~ > True RMS combination AC+DC function
~~ > Dual input Type K Thermometer
~~ > High True RMS ACV bandwidth (up to 100kHz)
~~ > 4 to 20mA, displayed as 0-100% for process current measurements
~~ > 1000V input protection on all functions
~~ > Highest resolution to 1µV, 0.01µA, 0.0001Hz, 0.01Ohm
~~ >
~~ >
~~ >
~~ > David
~~ >
~~ > David M. Ingebretsen M.S., M.E.
~~ > Collision Forensics & Engineering, Inc.
~~ > 2469 East Fort Union Blvd. STE 114
~~ > Salt Lake City, UT 84121
~~ > www.CFandE.com
~~ >
~~ > 801 733-5458 Office
~~ > 801 842-5451 Cell
~~ >
~~ > dingebre at CFandE.com
~~ > dingebre at 3dphysics.net
~~ >
~~ >
~~ >
~~ >
~~ >
~~ > _______________________________________________
~~ > Synth-diy mailing list
~~ > Synth-diy at dropmix.xs4all.nl
~~ > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy






More information about the Synth-diy mailing list