[sdiy] pcb house?

[Danjel van Tijn]

On Sun, Oct 11, 2009 at 11:11 AM, flightofharmony
<flight at flightofharmony.com> wrote:
> Actually, their barebones go two steps further than homebrew: Plated
> Through-Holes and tin finished. Very handy!
and let's not forget that this is also double sided and with a trace
spacing of 6 mils!




> Best regards,
>
> ~flight
> flight at flightofharmony.com
> http://www.flightofharmony.com
>
>> -----Original Message-----
>> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
>> bounces at dropmix.xs4all.nl] On Behalf Of HL-SDK Synths
>> Sent: Sunday, October 11, 2009 8:45 AM
>> To: Danjel van Tijn
>> Cc: synthdiy DIY
>> Subject: Re: [sdiy] pcb house?
>>
>> I have not used their barebones service but have played around with
>> getting quotes for it. It seems the optimal price/performance range is
>> when you're getting 3-5 slightly-larger-than-hand-sized boards made.
>> One day!
>>
>> The boards for their other services are professional and definitely
>> WSYWIG so I'll be triple-checking the files before I send them out.
>> The barebones ones I can imagine come as I fabbed them myself, minus
>> the pitting and sloppy drilling. I'd do that service but I like the
>> way soldermask looks
>>
>> ;-p
>>
>> On Sat, Oct 10, 2009 at 2:04 PM, Danjel van Tijn <danjel at gmail.com> wrote:
>> > wow that is cheap! So there is no silkscreen layer (is this called
>> > "legend" ?) and no solder mask so all the traces are exposed. Seems
>> > like a worthwhile tradeoff for having that price and one day
>> > turnaround.
>> >
>> > cheers,
>> >    Danjel
>> >
>> > On Sat, Oct 10, 2009 at 10:26 AM, flightofharmony
>> > <flight at flightofharmony.com> wrote:
>> >> I use Advanced Circuits (http://www.4pcb.com/) for quick-turn PCBs.
> Just be
>> >> sure you have your files right because what they see is what you get!
>> >> If you're not concerned about having soldermask, go with their
> barebones
>> >> deal: https://www.barebonespcb.com/!BB1.asp
>> >> Guaranteed 1-day turnaround, you specify the shipping. No waiting for a
>> >> response either - just enter the board dimensions to calculate cost and
>> >> upload your Gerbers.
>> >>
>> >> Best regards,
>> >>
>> >> ~flight
>> >> flight at flightofharmony.com
>> >> http://www.flightofharmony.com
>> >>
>> >>> -----Original Message-----
>> >>> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
>> >>> bounces at dropmix.xs4all.nl] On Behalf Of Danjel van Tijn
>> >>> Sent: Friday, October 09, 2009 3:58 PM
>> >>> To: synthdiy DIY
>> >>> Subject: [sdiy] pcb house?
>> >>>
>> >>> I have a small 2 layer pcb done in Eagle that I need to get fabricated
>> >>> and delivered by the end of next week. I only need 6 of them made and
>> >>> I am located in Vancouver BC.
>> >>> Anyone have recommendation of a place to go?
>> >>>
>> >>> cheers,
>> >>> Danjel
>> >>> _______________________________________________
>> >>> Synth-diy mailing list
>> >>> Synth-diy at dropmix.xs4all.nl
>> >>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> >>
>> >>
>> > _______________________________________________
>> > Synth-diy mailing list
>> > Synth-diy at dropmix.xs4all.nl
>> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> >
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>