[sdiy] pcb house?

[flightofharmony]

Actually, their barebones go two steps further than homebrew: Plated
Through-Holes and tin finished. Very handy!

Best regards, 

~flight
flight at flightofharmony.com
http://www.flightofharmony.com

> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
> bounces at dropmix.xs4all.nl] On Behalf Of HL-SDK Synths
> Sent: Sunday, October 11, 2009 8:45 AM
> To: Danjel van Tijn
> Cc: synthdiy DIY
> Subject: Re: [sdiy] pcb house?
> 
> I have not used their barebones service but have played around with
> getting quotes for it. It seems the optimal price/performance range is
> when you're getting 3-5 slightly-larger-than-hand-sized boards made.
> One day!
> 
> The boards for their other services are professional and definitely
> WSYWIG so I'll be triple-checking the files before I send them out.
> The barebones ones I can imagine come as I fabbed them myself, minus
> the pitting and sloppy drilling. I'd do that service but I like the
> way soldermask looks
> 
> ;-p
> 
> On Sat, Oct 10, 2009 at 2:04 PM, Danjel van Tijn <danjel at gmail.com> wrote:
> > wow that is cheap! So there is no silkscreen layer (is this called
> > "legend" ?) and no solder mask so all the traces are exposed. Seems
> > like a worthwhile tradeoff for having that price and one day
> > turnaround.
> >
> > cheers,
> >    Danjel
> >
> > On Sat, Oct 10, 2009 at 10:26 AM, flightofharmony
> > <flight at flightofharmony.com> wrote:
> >> I use Advanced Circuits (http://www.4pcb.com/) for quick-turn PCBs.
Just be
> >> sure you have your files right because what they see is what you get!
> >> If you're not concerned about having soldermask, go with their
barebones
> >> deal: https://www.barebonespcb.com/!BB1.asp
> >> Guaranteed 1-day turnaround, you specify the shipping. No waiting for a
> >> response either - just enter the board dimensions to calculate cost and
> >> upload your Gerbers.
> >>
> >> Best regards,
> >>
> >> ~flight
> >> flight at flightofharmony.com
> >> http://www.flightofharmony.com
> >>
> >>> -----Original Message-----
> >>> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
> >>> bounces at dropmix.xs4all.nl] On Behalf Of Danjel van Tijn
> >>> Sent: Friday, October 09, 2009 3:58 PM
> >>> To: synthdiy DIY
> >>> Subject: [sdiy] pcb house?
> >>>
> >>> I have a small 2 layer pcb done in Eagle that I need to get fabricated
> >>> and delivered by the end of next week. I only need 6 of them made and
> >>> I am located in Vancouver BC.
> >>> Anyone have recommendation of a place to go?
> >>>
> >>> cheers,
> >>> Danjel
> >>> _______________________________________________
> >>> Synth-diy mailing list
> >>> Synth-diy at dropmix.xs4all.nl
> >>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >>
> >>
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy