[sdiy] MOTM E350 Morphing Terrarium stereo samples

[Paul Schreiber]

> The irony is that I go to the Muff's site Paul referred to and again
> (immediately) am hit with a bunch of cat-related stuff.
>

This thread certified 100% cat-free:

http://www.muffwiggler.com/forum/viewtopic.php?t=8497


> Paul, how did you come up with the concept of this module?
> Did you experiment with a soft synth or something for the concept?
> Sounds kind of like a phaser and pwm combined.  Is it designed for
> stereo or is it mixed that way? (I haven't yet located the discussion
> in the Muffs site due to all the cat talk in the way).  You only touched
> on low frequencies at the end.  How about more of that?
>

No soft synths were loaded in the making of this module (unless you count 
MatLab).

a) yes, is has 2 outputs, so that is the "stereo". One output is for 
scanning the wavetables in the X&Y directions using 2 CVs, the other scans 
'end-to-end' using 1 CV
b) the sine waves in this bank were designed by Robert Rich in a very 
specific order to get these effects. There are 3 banks total. The other 2 
banks get successively "weirder".
c) the HW is 99% of the Euro version of the Cloud Generator, seen in this 
thread:

Overview: http://www.muffwiggler.com/forum/viewtopic.php?t=6639
Demos: http://www.muffwiggler.com/forum/viewtopic.php?t=6528

Comments (non-pet related!) welcome.

Paul S.