[sdiy] MOTM E350 Morphing Terrarium stereo samples

[Barry Klein]

The irony is that I go to the Muff's site Paul referred to and again
(immediately) am hit with a bunch of cat-related stuff.

Paul, how did you come up with the concept of this module?
Did you experiment with a soft synth or something for the concept?
Sounds kind of like a phaser and pwm combined.  Is it designed for
stereo or is it mixed that way? (I haven't yet located the discussion
in the Muffs site due to all the cat talk in the way).  You only touched
on low frequencies at the end.  How about more of that?

Barry


----- Original Message ----- 
From: "jeff brown" <guitaricon at verizon.net>
To: "Synth-DIY" <synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, October 07, 2009 8:07 PM
Subject: Re: [sdiy] MOTM E350 Morphing Terrarium stereo samples


> BTW, Very nice sound samples, Paul.
>
> Back to the cat discussion...
>
> ----- Original Message ----- 
> From: "Paul Schreiber" <synth1 at airmail.net>
> To: "Synth-DIY" <synth-diy at dropmix.xs4all.nl>
> Sent: Wednesday, October 07, 2009 6:00 PM
> Subject: [sdiy] MOTM E350 Morphing Terrarium stereo samples
>
>
>>
>>
>>
>>> Here are 2 "knob twiddling" samples of the upcoming Euro E350 Morphing 
>>> Terrarium wavetable module. The module has 3 banks of 64 wavetable each 
>>> (these demos use only Bank A, a sinewave harmonic bank). The 2 audio 
>>> outputs are called XY MORPH and Z MORPH. The wavetables are arranged as 
>>> a 8 x 8 matrix, and the X & Y MORPH CVs index into the wavetable, while 
>>> the Z is a linear index from #1 to #64. The DSP then interpolates from 2 
>>> *adjacent* wavetables. In this manner, we get ~ 4100 different waveforms 
>>> per bank.
>>>
>>> The demo uses a LFO into the MORPH Z CV input (right audio). The XY 
>>> audio (left channel) is just turning the 2 panel pots.
>>>
>>> www.synthtech.com/demo/e350/e350_stereo1.mp3
>>>
>>> www.synthtech.com/demo/e350/e350_stereo2.mp3
>>>
>>> There are a few "dropouts" when I bumped the alligator clips on the 
>>> cables and 1 "noise glitch" when I jiggled the power cable trying to 
>>> keep my cat Moses from jumping on the bench to investigate all the 
>>> racket.
>>>
>>> Additional info is on the Euro forum at www.muffwiggler.com (panel 
>>> mockups, etc). The modules will be sold via Analogue Haven and 
>>> Schneidersburo in late Nov/early Dec.
>>>
>>> Paul S.
>>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy