[sdiy] MOTM E350 Morphing Terrarium stereo samples

[jeff brown]

BTW, Very nice sound samples, Paul.

Back to the cat discussion...

----- Original Message ----- 
From: "Paul Schreiber" <synth1 at airmail.net>
To: "Synth-DIY" <synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, October 07, 2009 6:00 PM
Subject: [sdiy] MOTM E350 Morphing Terrarium stereo samples


>
>
>
>> Here are 2 "knob twiddling" samples of the upcoming Euro E350 Morphing 
>> Terrarium wavetable module. The module has 3 banks of 64 wavetable each 
>> (these demos use only Bank A, a sinewave harmonic bank). The 2 audio 
>> outputs are called XY MORPH and Z MORPH. The wavetables are arranged as a 
>> 8 x 8 matrix, and the X & Y MORPH CVs index into the wavetable, while the 
>> Z is a linear index from #1 to #64. The DSP then interpolates from 2 
>> *adjacent* wavetables. In this manner, we get ~ 4100 different waveforms 
>> per bank.
>>
>> The demo uses a LFO into the MORPH Z CV input (right audio). The XY audio 
>> (left channel) is just turning the 2 panel pots.
>>
>> www.synthtech.com/demo/e350/e350_stereo1.mp3
>>
>> www.synthtech.com/demo/e350/e350_stereo2.mp3
>>
>> There are a few "dropouts" when I bumped the alligator clips on the 
>> cables and 1 "noise glitch" when I jiggled the power cable trying to keep 
>> my cat Moses from jumping on the bench to investigate all the racket.
>>
>> Additional info is on the Euro forum at www.muffwiggler.com (panel 
>> mockups, etc). The modules will be sold via Analogue Haven and 
>> Schneidersburo in late Nov/early Dec.
>>
>> Paul S.
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy