[sdiy] DC-DC converter problem

[mark verbos]

the problem is with all 3 supplies that I have? That all do the same  
thing when this is connected, but work just fine with everything else  
I attach to them? Somehow I doubt it.


Mark



On Nov 15, 2009, at 11:00 PM, Paul Perry wrote:

> I'd take a 220 ohm resistor & put it across the 12V supply
> (without the converter).
> That will draw a little more than 50mA - and I suspect you will see  
> that the problem is in the supply,
> not the converter!
>
> paul perry Melbourne Australia
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy