[sdiy] tiny pcbs?

[cheater cheater]

> I would think that a Dremel is going to find PCB material hard work.

Oh no, you wouldn't use the file bit, you can get a circular saw bit.

> Plus
> would probably produce very fine dust.

Do it under running tap water, of course.

D.

On Sun, Nov 1, 2009 at 13:24, Seb Francis <seb at burnit.co.uk> wrote:
> I would think that a Dremel is going to find PCB material hard work.  Plus
> would probably produce very fine dust.
>
> Best thing I've found for DIY cutting of PCBs is a sharp jigsaw blade,
> designed for metal (very fine teeth).  It won't be sharp by the time you've
> finished!  My jigsaw has a plastic plate that clips on the bottom to prevent
> scratching.  Otherwise, best to protect the PCB somehow (masking tape?)
>
> Seb
>
>
> cheater cheater wrote:
>>
>> Might even be able to skip the groove and just Dremel(tm) it all yourself.
>>
>> D.
>>
>> On Sun, Nov 1, 2009 at 07:52, Paul Perry <pfperry at melbpc.org.au> wrote:
>>
>>>
>>> Danjel, if you need a quantity (say 4 or more)
>>> you can do a number beside each other & get
>>> a groove milled between them so you can snap them
>>> apart.
>>>
>>> paul perry Melbourne Australia
>>>
>>> ----- Original Message ----- From: "Danjel van Tijn"
>>>
>>>
>>>>
>>>> I am looking for a pcb fab house that can make 2 layer boards that are
>>>> really narrow in width (10mm wide and 20mm wide).
>>>> Most of the places I checked have a minimum of about 1".
>>>>
>>>> cheers,
>>>> Danjel
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at dropmix.xs4all.nl
>>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>>
>>>
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.423 / Virus Database: 270.14.40/2471 - Release Date:
>>> 10/31/09
>>> 07:53:00
>>>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>>
>>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>