[sdiy] NC pin on ICs

[Dave Kendall]

sorry guys - posted before I got the replies.

~ Will not tie the NC pin to +V.

cheers,
Dave
(Not Connected right now ;-)


On May 22, 2009, at 06:05, Paul Perry wrote:

> Also, you will have to read the manual from that particular 
> manufacturer,
> it sometimes happens that the 'spare' pin is doing something different.
> Personally, I wouldn't attach anything to a NC pin.
>
> If it is a matter of helping with a layout problem, I would cut the 
> 'spare' pin right off.
> Hardly good practice, though!
>
> paul perry Melbourne Australia
>
>> From: "Matthew Smith"
>> You will need to read the specific datasheet.  Sometimes NC pins can 
>> be
>> grounded, sometimes there are dire warnings saying that they should 
>> NOT
>> be connected.
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>