[sdiy] NC pin on ICs

Paul Perry pfperry at melbpc.org.au
Fri May 22 07:05:53 CEST 2009


Also, you will have to read the manual from that particular manufacturer,
it sometimes happens that the 'spare' pin is doing something different.
Personally, I wouldn't attach anything to a NC pin.

If it is a matter of helping with a layout problem, I would cut the 'spare' 
pin right off.
Hardly good practice, though!

paul perry Melbourne Australia

>From: "Matthew Smith"
> You will need to read the specific datasheet.  Sometimes NC pins can be
> grounded, sometimes there are dire warnings saying that they should NOT
> be connected.
>




More information about the Synth-diy mailing list