[sdiy] Prototype wiring pen

[Needham, Alan]

I have used the VeroWire system for 25mA no problem ... 
http://electronics.sonicsheep.com/#2.5
the wire routing combs are a help but if appearance isn't important (!)
you could just make loose loops between terminations, adding to the
rat's nest but letting you dig through to terminals below the wiring?

Gate and trig signals should be no problem!
	Alan


_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

Centrica plc

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England and Wales No 3033654