[sdiy] Digi-Mod

[Seb Francis]

Eric Brombaugh wrote:
>
> I'm also using the CS4270 on my ARM/FPGA board & ran into the same 
> thing. Although it's just a matter of tweaking a bit in the control 
> registers to disable the feature, it's a bit annoying until you get 
> around to it.

Yeah, it's useful to read the datasheet carefully sometimes!  In my case 
I have the CS4270 running in standalone mode so as not to use up more 
dsPIC I/O than necessary.  So since this 'feature' can't be turned off, 
I just output a 1 every 8192 samples while the outputs are inactive 
(i.e. outputting 0s).  I don't remember having to do this with the 
CS4272 in the 4xD.

>
> Which reminds me - I've got to do some more firmware on the dsPICfun 
> board at some point. Just been too wrapped up in the FPGA board lately...
>

Yeah that looks like an interesting project ... a whole new set of 
tricks to learn!

Seb