[sdiy] Oberheim DX

[Doug Terrebonne]

The regular DX has an assignable trigger input. The manuals says it'll take a switch trigger or 5V negative going pulse...

Doug

--- On Sat, 3/21/09, Tony K <kalotony at videotron.ca> wrote:

> From: Tony K <kalotony at videotron.ca>
> Subject: Re: [sdiy] Oberheim DX
> To: "Laurie Biddulph" <elby_designs at ozemail.com.au>, "Synth-Diy" <synth-diy at dropmix.xs4all.nl>
> Date: Saturday, March 21, 2009, 1:24 AM
> IIRC it was the DMX not the DX/Stretch that had external
> trigger inputs (TTL ?)
> 
> Tony K
> 
> At 01:42 AM 3/21/2009, Laurie Biddulph wrote:
> >Hi,
> >
> >Does anyone have the schematics for the Oberheim DX or
> can tell me 
> >the exact voltages required for the trigger inputs?
> >I know the DX uses an S-TRIG input but am not sure what
> the internal 
> >circuitry is and the manual says INVERTED?
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy