[sdiy] Ian's Chaos Modules

[Dan Snazelle]

IAN-two more things


1.one of the reasons i have done a lot of higher rate stuff with my JERKSTER is because it seems to be very tricky to get the pot to stay in the low rate regions. I was wondering if i could switch out the timing cap, or maybe even add a second cap and a HIGH.LOW switch which would add a mode that would limit its range? or would this kill the chances of chaos happening?

2.i made some very long recordings of the setup i posted from saturday. (the jerkster with T/G/T/S/h and 2 vco's, dividers, filter, adsr and at times, a quantizer)

i could edit a few into some mp3's if you let me know where to send em.
i got some quite amazing sounds.


thanks





--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc

(updated monthly)

http://www.soundclick.com/lossnyc.htm



http://www.indie911.com/dan-snazelle

(or for techno) http://www.myspace.com/snazelle

ALSO check out Dan synth/Fx projects:

AUDIO ARK:

www.youtube.com/watch?v=TJRpvaOcUic

www.youtube.com/watch?v=BqIa_lXQNTA&feature=channel_page

www.youtube.com/watch?v=V4nJPjGgOcU&feature=channel_page







----------------------------------------
> Date: Tue, 17 Mar 2009 11:56:35 -0600
> To: pristak at sbcglobal.net; synth-diy at dropmix.xs4all.nl; subjectivity at hotmail.com
> From: ijfritz at comcast.net
> Subject: Re: [sdiy] Ian's Chaos Modules
>
> Ouch, it hurts my head just to think about all that. :-)
>
> But, yeah, that's roughly the level of complexity I've worked with. Using
> the contunuous chaos generators along with the T/G/T/S/H gives you both
> contunuous and discrete chaotic signals to work with, either separately or
> in combination.
>
> I'd love to hear some recordings of that setup, if you have a chance. We
> could probably get Scott to put something up on the Bridechamber site
> demonstrating using these different modules together.
>
> Thanks for the report, Ross!
>
> Ian
>
>
> At 09:59 AM 3/16/2009, Ross Stapf wrote:
>
>>I did something similar SAT night. I was using mulitple outputs from a
>>Mankato filter set to self resonate and being modulated by the
>>Jerkster. The multiple outputs went to a Blacet mixer/Processer. 3 of
>>the outputs went to a Blacet scanner first. The output of the Mixer
>>processor went to a Fritz Waveshaper which was being modulated by one of
>>the other Jerkster outputs. This went into a CGS Tube VCA which was being
>>opened by a MOTM ADSR which was getting its gate signal from a T/G/S/H
>>module that was fed by another of the Jerkster outputs.
>>
>>There were other variations using those modules and a MOTM VCA doing ring
>>mod as well at times. I had a Doepfer LFO going as well at times feeding
>>the T/G/S/H along with the Jerkster to get S/H signal to modulate various
>>things.
>>
>>Good times. I still have that set up. I need to record it.
>>
>>Ross
>