[sdiy] Ian's Chaos Modules

[Ian Fritz]

Ouch, it hurts my head just to think about all that. :-)

But, yeah, that's roughly the level of complexity I've worked with.  Using 
the contunuous chaos generators along with the T/G/T/S/H  gives you both 
contunuous and discrete chaotic signals to work with, either separately or 
in combination.

I'd love to hear some recordings of that setup, if you have a chance.  We 
could probably get Scott to put something up on the Bridechamber site 
demonstrating using these different modules together.

Thanks for the report, Ross!

   Ian


At 09:59 AM 3/16/2009, Ross Stapf wrote:

>I did something similar SAT night.  I was using mulitple outputs from a 
>Mankato filter set to self resonate and being modulated by the 
>Jerkster.  The multiple outputs went to a Blacet mixer/Processer.   3 of 
>the outputs went to a Blacet scanner first.  The output of the Mixer 
>processor went to a Fritz Waveshaper which was being modulated by one of 
>the other Jerkster outputs.  This went into a CGS Tube VCA which was being 
>opened by a MOTM ADSR which was getting its gate signal from a T/G/S/H 
>module that was fed by another of the Jerkster outputs.
>
>There were other variations using those modules and a MOTM VCA doing ring 
>mod as well at times.  I had a Doepfer LFO going as well at times feeding 
>the T/G/S/H along with the Jerkster to get S/H signal to modulate various 
>things.
>
>Good times.  I still have that set up.  I need to record it.
>
>Ross