[sdiy] Ian's Chaos Modules

[Dan Snazelle]

can you explain what the scanner does in your setup?

i have really been enjoying putting this all through ray's quantizer as well.

thanks



--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc

(updated monthly)

http://www.soundclick.com/lossnyc.htm



http://www.indie911.com/dan-snazelle

(or for techno) http://www.myspace.com/snazelle

ALSO check out Dan synth/Fx projects:

AUDIO ARK:

www.youtube.com/watch?v=TJRpvaOcUic

www.youtube.com/watch?v=BqIa_lXQNTA&feature=channel_page

www.youtube.com/watch?v=V4nJPjGgOcU&feature=channel_page







----------------------------------------
> Date: Mon, 16 Mar 2009 08:59:44 -0700
> From: pristak at sbcglobal.net
> Subject: Re: [sdiy] Ian's Chaos Modules
> To: synth-diy at dropmix.xs4all.nl; subjectivity at hotmail.com
>
>
> I did something similar SAT night. I was using mulitple outputs from a Mankato filter set to self resonate and being modulated by the Jerkster. The multiple outputs went to a Blacet mixer/Processer. 3 of the outputs went to a Blacet scanner first. The output of the Mixer processor went to a Fritz Waveshaper which was being modulated by one of the other Jerkster outputs. This went into a CGS Tube VCA which was being opened by a MOTM ADSR which was getting its gate signal from a T/G/S/H module that was fed by another of the Jerkster outputs.
>
> There were other variations using those modules and a MOTM VCA doing ring mod as well at times. I had a Doepfer LFO going as well at times feeding the T/G/S/H along with the Jerkster to get S/H signal to modulate various things.
>
> Good times. I still have that set up. I need to record it.
>
> Ross
>
>
> --- On Sun, 3/15/09, Dan Snazelle  wrote:
>
>> From: Dan Snazelle 
>> Subject: [sdiy] Ian's Chaos Modules
>> To: synth-diy at dropmix.xs4all.nl
>> Date: Sunday, March 15, 2009, 6:01 PM
>> Well I had quite a night last night....staying up till 5am
>> with nothing but me and my (newly) fine tuned modular.
>>
>> (i dont get much sdiy time lately with the new baby)
>>
>> anyway.
>>
>> Due to working on the audio ark for so long i HAD built a
>> few chaos modules but never had the chance to fully explore
>> some of the ways of interconnecting them
>>
>> in the past i had been using them more as individual
>> modulation sources.
>>
>> anyway...last night i got some amazing stuff going with
>> this setup:
>>
>> X of jerkster into vco 1. (with cv offset)
>> Z (i think) going into the timing input of the T/G/S/H
>> vco 1 sawtooth going into the input of one half of the
>> T/G/S/H module
>>
>> the sample and hold output going into the offset CV in off
>> my CGS vco (which allows for negative and positive CV...this
>> is where i was getting some UNREAL effects...by reversing
>> the Sample and Hold Cv source,etc.
>>
>> i also tried stuff where i muted one of the jerkster
>> outputs and sent one to the cv in of my ssm2044 filter.
>>
>> the gate and trigger out of the T/G/S/H module were being
>> sent into my adsr.
>>
>> this was something i had never tried before...having so
>> many interconnections all being controlled by the JERKSTER.
>> such little changes would often make for very large results
>>
>>
>> so now i have tons of questions!!
>>
>> 1. have many people on here done experiments with multiple
>> chaos modules and if so, could you explain how you set them
>> up?
>>
>> 2. do you tend to get better results at HIGHER or lower
>> RATES?
>> 3. what are you plugging into the MOD ins (of either the
>> Jerkster or the T/G/S/H)?
>>
>> I dont hear many people mentioning HOW they use these
>> modules. I have always been a big fan but more and more I am
>> starting to feel like the options they open up are truly
>> unique.
>>
>> with a touch of reverb (or a lot) added even to just the X
>> and Y going to Vco's and the z to the filter, i was
>> getting some amazing SPRING like sounds at high rates.
>>
>> and on and on.
>>
>> sorry for the long post but id love to get some more people
>> talking about these.
>>
>>
>> thanks so much
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy