[sdiy] Ian's Chaos Modules

[Ross Stapf]

I did something similar SAT night.  I was using mulitple outputs from a Mankato filter set to self resonate and being modulated by the Jerkster.  The multiple outputs went to a Blacet mixer/Processer.   3 of the outputs went to a Blacet scanner first.  The output of the Mixer processor went to a Fritz Waveshaper which was being modulated by one of the other Jerkster outputs.  This went into a CGS Tube VCA which was being opened by a MOTM ADSR which was getting its gate signal from a T/G/S/H module that was fed by another of the Jerkster outputs.  

There were other variations using those modules and a MOTM VCA doing ring mod as well at times.  I had a Doepfer LFO going as well at times feeding the T/G/S/H along with the Jerkster to get S/H signal to modulate various things.

Good times.  I still have that set up.  I need to record it.

Ross


--- On Sun, 3/15/09, Dan Snazelle <subjectivity at hotmail.com> wrote:

> From: Dan Snazelle <subjectivity at hotmail.com>
> Subject: [sdiy] Ian's Chaos Modules
> To: synth-diy at dropmix.xs4all.nl
> Date: Sunday, March 15, 2009, 6:01 PM
> Well I had quite a night last night....staying up till 5am
> with nothing but me and my (newly) fine tuned modular.
> 
> (i dont get much sdiy time lately with the new baby)
> 
> anyway.
> 
> Due to working on the audio ark for so long i HAD built a
> few chaos modules but never had the chance to fully explore
> some of the ways of interconnecting them
> 
> in the past i had been using them more as individual
> modulation sources.
> 
> anyway...last night i got some amazing stuff going with
> this setup:
> 
> X of jerkster into vco 1. (with cv offset)
> Z (i think)  going into the timing input of the T/G/S/H
> vco 1 sawtooth going into the input of one half of the
> T/G/S/H module
> 
> the sample and hold output going into the offset CV in off
> my CGS vco (which allows for negative and positive CV...this
> is where i was getting some UNREAL effects...by reversing
> the Sample and Hold Cv source,etc.
> 
> i also tried stuff where i muted one of the jerkster
> outputs and sent one to the cv in of my ssm2044 filter.
> 
> the gate and trigger out of the T/G/S/H module were being
> sent into my adsr.
> 
> this was something i had never tried before...having so
> many interconnections all being controlled by the JERKSTER.
> such little changes would often make for very large results
> 
> 
> so now i have tons of questions!!
> 
> 1. have many people on here done experiments with multiple
> chaos modules and if so, could you explain how you set them
> up?
> 
> 2. do you tend to get better results at HIGHER or lower
> RATES?
> 3. what are you plugging into the MOD ins (of either the
> Jerkster or the T/G/S/H)?
> 
> I dont hear many people mentioning HOW they use these
> modules. I have always been a big fan but more and more I am
> starting to feel like the options they open up are truly
> unique.
> 
> with a touch of reverb (or a lot) added even to just the X
> and Y going to Vco's and the z to the filter, i was
> getting some amazing SPRING like sounds at high rates.
> 
> and on and on.
> 
> sorry for the long post but id love to get some more people
> talking about these.
> 
> 
> thanks so much
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy