[sdiy] best method for clocking modular to DAW?

[Stewart Pye]

There used to be a simple single PIC MIDI - Trigger design on the net 
but I can't find it now. I designed one a few years ago using an AVR 
micro but this had DAC outputs for triggering drums. I might do a simple 
trigger unit one day but it won't happen overnight. I haven't programmed 
for years.
Having a trigger out that you can sequence can be more useful than just 
using sync pulses.

Stew.


Dan Snazelle wrote:
>
>   
>> Also, try using a kick instead of a highhat as it will give you S&H
>> something stronger to "chew" on.  Just make sure it has an instant attack
>> and isn't gated or enveloped in some way.
>>     
>
>
> one problem i find, especially with a loud kick, is that for some reason, if i am not super careful with the output level, i will HEAR the audio i am using as a trigger bleeding into my synth signal. this seems to happen less with a short pulse like a hihat which is why i was using that.
>
>
> thanks for all the great info
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>