June 2009 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jun 1 00:07:44 CEST 2009
Ending: Tue Jun 30 22:56:19 CEST 2009
Messages: 885

• [sdiy] Digital interpolation filtering   Neil Johnson
• [sdiy] Looking for Advice in spending a few hundred dollars ondesoldering technologies.   nicolas
• [sdiy] Which lead-free solder to use?   Karl Ekdahl
• [sdiy] Which lead-free solder to use?   Ingo Debus
• [sdiy] Looking for Advice in spending a few hundred dollars on desoldering technologies.   Graham Atkins
• [sdiy] London at the end of the month   paul.maddox.mail-list at synth.net
• [sdiy] bass station schematic   dave
• [sdiy] VCO - Saw and Ramp Outputs   Jerry Gray-Eskue
• [sdiy] bass station schematic   Julian
• [sdiy] bass station schematic   Tom Bugs
• [sdiy] Which lead-free solder to use?   Paul Schreiber
• [sdiy] bass station schematic   Julian
• [sdiy] VCO - Saw and Ramp Outputs   David G. Dixon
• [sdiy] 4000 series CMOS Question   Altitude
• [sdiy] VCO - Saw and Ramp Outputs   Tim Parkhurst
• [sdiy] MFOS Soundlab Oscillators not oscillating   James R. Coplin
• [sdiy] MFOS Soundlab Oscillators not oscillating   Tim Parkhurst
• [sdiy] saw to tri/sine options   Aaron Lanterman
• [sdiy] saw to tri/sine options   Scott
• [sdiy] VCO - Saw and Ramp Outputs   David G. Dixon
• [sdiy] saw to tri/sine options   mark verbos
• [sdiy] saw to tri/sine options   mark verbos
• [sdiy] Topward 6303D-10 Bench Powersupply Service Manual?   James R. Coplin
• [sdiy] MFOS Soundlab Oscillators not oscillating   David G. Dixon
• [sdiy] saw to tri/sine options   David G. Dixon
• [sdiy] saw to tri/sine options   Jerry Gray-Eskue
• [sdiy] MFOS Soundlab Oscillators not oscillating   David Holt
• [sdiy] MFOS Soundlab Oscillators not oscillating   James R. Coplin
• [sdiy] LFO control - frequency or time?   Neil Johnson
• [sdiy] LFO control - frequency or time?   Veronica Merryfield
• [sdiy] LFO control - frequency or time?   Tom Wiltshire
• [sdiy] saw to tri/sine options   mark verbos
• [sdiy] LFO control - frequency or time?   mark verbos
• [sdiy] LFO control - frequency or time?   nicolas
• [sdiy] MFOS Soundlab Oscillators not oscillating   David G. Dixon
• [sdiy] LFO control - frequency or time?   David G. Dixon
• [sdiy] saw to tri/sine options   Kyle Stephens
• [sdiy] saw to tri/sine options   David G. Dixon
• FW: [sdiy] saw to tri/sine options   Jerry Gray-Eskue
• [sdiy] saw to tri/sine options   Aaron Lanterman
• [sdiy] saw to tri/sine options   David G. Dixon
• [sdiy] saw to tri/sine options   Tim Parkhurst
• [sdiy] Magic Smoke Super LFO boards ready   Tim Parkhurst
• [sdiy] saw to tri/sine options   jhaible at debitel.net
• [sdiy] Re: Magic Smoke Super LFO boards ready   Andre Majorel
• [sdiy] MFOS Soundlab Oscillators not oscillating   Andy Wilson
• [sdiy] MFOS Soundlab Oscillators not oscillating   Graham Atkins
• [sdiy] MFOS Soundlab Oscillators not oscillating   Tom Wiltshire
• [sdiy] MFOS Soundlab Oscillators not oscillating   Dave Kendall
• [sdiy] saw to tri/sine options   Jerry Gray-Eskue
• [sdiy] LFO control - frequency or time?   Neil Johnson
• [sdiy] saw to tri/sine options   Jerry Gray-Eskue
• [sdiy] saw to tri/sine options   Dan Snazelle
• [sdiy] LFO control - frequency or time?   Michael Zacherl.
• [sdiy] LFO control - frequency or time?   Tom Wiltshire
• [sdiy] LFO control - frequency or time?   Tom Wiltshire
• [sdiy] saw to tri/sine options   Ian Fritz
• [sdiy] LFO control - frequency or time?   Veronica Merryfield
• [sdiy] Synth DIY UK room booking   Neil Johnson
• [sdiy] Re: [AH] Re: Magic Smoke Super LFO boards ready   Tim Parkhurst
• [sdiy] saw to tri/sine options   Jerry Gray-Eskue
• [sdiy] MFOS Soundlab Oscillators not oscillating   David G. Dixon
• [sdiy] saw to tri/sine options   David G. Dixon
• [sdiy] saw to tri/sine options   Ian Fritz
• AW: Re: [sdiy] LFO control - frequency or time?   Michael Zacherl (mobile)
• [sdiy] saw to tri/sine options   mark verbos
• [sdiy] saw to tri/sine options   Kyle Stephens
• [sdiy] saw to tri/sine options   David G. Dixon
• [sdiy] saw to tri/sine options   Scott Nordlund
• [sdiy] Arp Avatar ADSR problem   Karl Ekdahl
• [sdiy] Arp Avatar ADSR problem   Karl Ekdahl
• [sdiy] TLN-867 PCB   David Ingebretsen
• [sdiy] semi-OT: Alesis looking for a design engineer   Amos
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Aaron Lanterman
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Aaron Lanterman
• [sdiy] saw to tri/sine options   Aaron Lanterman
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   KA4HJH
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   KA4HJH
• [sdiy] MidiDuino MIDI Stack   Manuel Odendahl
• [sdiy] cleaning the pots on an MS-20   Samppa Tolvanen
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Dan Snazelle
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Dan Snazelle
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Jerry Gray-Eskue
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Ian Fritz
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Tony Rolando
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Ian Fritz
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Tom Wiltshire
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Jerry Gray-Eskue
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Steve Ridley
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Aaron Lanterman
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Scott Nordlund
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Aaron Lanterman
• [sdiy] Triple Lockhart cascade (while we're on the subject of waveshaping...)   Aaron Lanterman
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Aaron Lanterman
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Aaron Lanterman
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Tom Wiltshire
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Jerry Gray-Eskue
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   David G. Dixon
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   David G. Dixon
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Tom Wiltshire
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   David G. Dixon
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Aaron Lanterman
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Jerry Gray-Eskue
• [sdiy] panel mount optical jacks?   mark verbos
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Aaron Lanterman
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   David G. Dixon
• [sdiy] MidiDuino MIDI Stack   nicolas
• [sdiy] panel mount optical jacks?   Jay Schwichtenberg
• [sdiy] panel mount optical jacks?   Ullrich Peter
• [sdiy] panel mount optical jacks?   Samppa Tolvanen
• [sdiy] panel mount optical jacks?   Ullrich Peter
• [sdiy] Anyone in the UK (for now) interested in engraved panels?   Julian
• [sdiy] panel mount optical jacks?   Samppa Tolvanen
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Forbes, William ALGLSG-LXES
• [sdiy] MidiDuino MIDI Stack   Manuel Odendahl
• [sdiy] aluminum panel finish types   Danjel van Tijn
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Ian Fritz
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Jerry Gray-Eskue
• [sdiy] aluminum panel finish types   David G. Dixon
• [sdiy] aluminum panel finish types   Danjel van Tijn
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Ian Fritz
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Jerry Gray-Eskue
• [sdiy] aluminum panel finish types   Altitude
• [sdiy] Juergen Haible Solina Triple Chorus Demo   James R. Coplin
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Scott
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Ian Fritz
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Kylee Kennedy
• [sdiy] Simple (?) sequencer mod for syncopation   David G. Dixon
• [sdiy] Harmonic content of the "sigmoid" half-sine wave   Ingo Debus
• [sdiy] Vox Continental waveforms   Tom Wiltshire
• [sdiy] LFO control - frequency or time?   Ingo Debus
• [sdiy] Simple (?) sequencer mod for syncopation   Jerry Gray-Eskue
• [sdiy] finding Lecaine schematics? anyone from canada?   Dan Snazelle
• FW: [sdiy] Simple (?) sequencer mod for syncopation   Jerry Gray-Eskue
• [sdiy] Simple (?) sequencer mod for syncopation   David G. Dixon
• [sdiy] Simple (?) sequencer mod for syncopation   Jerry Gray-Eskue
• [sdiy] Vox Continental waveforms   John Henson
• [sdiy] Vox continental - one other thing...   Tom Wiltshire
• [sdiy] Simple (?) sequencer mod for syncopation   David G. Dixon
• [sdiy] Just..need..one more K2000 chip   Bob Weigel
• [sdiy] Vox continental - one other thing...   Travis Shire
• [sdiy] Simple (?) sequencer mod for syncopation   Aaron Lanterman
• [sdiy] Yet another try at explaining beat tones, etc.   Aaron Lanterman
• [sdiy] Taylor series and sums and difference tones   Aaron Lanterman
• [sdiy] Vox continental - one other thing...   Dave Manley
• [sdiy] Inside scoop on pots/sliders on Music Easel?   Aaron Lanterman
• [sdiy] Taylor series and sums and difference tones   Dave Manley
• [sdiy] Vox continental - one other thing...   Dave Manley
• [sdiy] Taylor series and sums and difference tones   Aaron Lanterman
• [sdiy] Taylor series and sums and difference tones   Dave Manley
• [sdiy] Taylor series and sums and difference tones   Dave Manley
• [sdiy] MFOS Seq ext clk in   Tom Adam
• [sdiy] Simple (?) sequencer mod for syncopation   Tom Wiltshire
• [sdiy] Taylor series and sums and difference tones   Tom Wiltshire
• [sdiy] MFOS Seq ext clk in   Samppa Tolvanen
• [sdiy] Vox continental - one other thing...   Mike
• [sdiy] Yet another try at explaining beat tones, etc.   Jerry Gray-Eskue
• [sdiy] Yet another try at explaining beat tones, etc.   Needham, Alan
• [sdiy] Yet another try at explaining beat tones, etc.   David Panseri
• [sdiy] Yet another try at explaining beat tones, etc.   Aaron Lanterman
• [sdiy] Yet another try at explaining beat tones, etc.   Jerry Gray-Eskue
• [sdiy] Simple (?) sequencer mod for syncopation   Ingo Debus
• [sdiy] Yet another try at explaining beat tones, etc.   Ian Fritz
• [sdiy] Yet another try at explaining beat tones, etc.   Aaron Lanterman
• [sdiy] Yet another try at explaining beat tones, etc.   Needham, Alan
• [sdiy] Yet another try at explaining beat tones, etc.   Aaron Lanterman
• [sdiy] Yet another try at explaining beat tones, etc.   Jerry Gray-Eskue
• [sdiy] Hewlett-Packard Oscillator   Donald Tillman
• [sdiy] Hewlett-Packard Oscillator   Travis Shire
• [sdiy] Hewlett-Packard Oscillator   Nathan M. Reeves
• [sdiy] Vox continental - one other thing...   dragons
• [sdiy] Simple (?) sequencer mod for syncopation   Amos
• [sdiy] MFOS Seq ext clk in   David G. Dixon
• [sdiy] A potential problem with a voice-assignable organ   Tom Wiltshire
• [sdiy] A potential problem with a voice-assignable organ   Tim Parkhurst
• [sdiy] hum on the outputs   Danjel van Tijn
• [sdiy] MFOS Seq ext clk in   Tom Adam
• [sdiy] A potential problem with a voice-assignable organ   David G. Dixon
• [sdiy] A potential problem with a voice-assignable organ   Tom Wiltshire
• [sdiy] A potential problem with a voice-assignable organ   thx1138
• [sdiy] A potential problem with a voice-assignable organ   Dave Manley
• [sdiy] A potential problem with a voice-assignable organ   Dan Snazelle
• [sdiy] Re: Juergen Haible Solina Triple Chorus Demo   Jay Vaughan
• [sdiy] Simple (?) sequencer mod for syncopation   Steven Cook
• [sdiy] hum on the outputs   Ingo Debus
• [sdiy] A potential problem with a voice-assignable organ   thx1138
• [sdiy] A potential problem with a voice-assignable organ   Aaron Lanterman
• [sdiy] Yet another try at explaining beat tones, etc.   Donald Tillman
• [sdiy] Arp Avatar ADSR problem   Tony K
• FW: [sdiy] A potential problem with a voice-assignable organ   Dan Snazelle
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Tom Wiltshire
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   thx1138
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Aaron Lanterman
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Antti Huovilainen
• [sdiy] Arp Avatar ADSR problem   Karl Ekdahl
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   thx1138
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   thx1138
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Scott Nordlund
• [sdiy] Simple (?) sequencer mod for syncopation   David G. Dixon
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Graham Atkins
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Dave Manley
• [sdiy] A potential problem with a voice-assignable organ   Dave Manley
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Dan Snazelle
• [sdiy] A potential problem with a voice-assignable organ   thx1138
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   thx1138
• [sdiy] Simple (?) sequencer mod for syncopation   Amos
• [sdiy] Simple (?) sequencer mod for syncopation   Scott Juskiw
• [sdiy] service manuals free to good home; technics SX organs; Sony DAT machines, PCM3324   Loscha
• [sdiy] Two-OTA VCAs (a la Oakley)   David G. Dixon
• [sdiy] Two-OTA VCAs (a la Oakley)   Ian Fritz
• [sdiy] PIC help   Scott Juskiw
• [sdiy] PIC help   thx1138
• [sdiy] PIC help   Eric Brombaugh
• [sdiy] PIC help   Jerry Gray-Eskue
• [sdiy] PIC help   John Loffink
• [sdiy] Dual MFOS ADSR layouts   David G. Dixon
• [sdiy] PIC help   Neil Johnson
• [sdiy] PIC help   Jason Tribbeck
• [sdiy] PIC help   Csaba Zvekan
• [sdiy] PIC help   Tom Wiltshire
• [sdiy] Dual MFOS ADSR layouts   Jerry Gray-Eskue
• [sdiy] good moog schematic redraws?   Dan Snazelle
• [sdiy] good moog schematic redraws?   thx1138
• [sdiy] good moog schematic redraws?   Tom Wiltshire
• [sdiy] PIC help   Andre Majorel
• [sdiy] good moog schematic redraws?   Dan Snazelle
• [sdiy] good moog schematic redraws?   thx1138
• [sdiy] good moog schematic redraws?   Mark
• [sdiy] sequential circuits prophet 600 service manual   function form
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Antti Huovilainen
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Antti Huovilainen
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Antti Huovilainen
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Tom Wiltshire
• [sdiy] sequential circuits prophet 600 service manual   Ullrich Peter
• [sdiy] Oberheim SEM mod'ing   Todd Sines
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Dan Snazelle
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   George Hearn
• [sdiy] Blacet schematics   David G. Dixon
• [sdiy] SSM2164 VCAs   David G. Dixon
• [sdiy] Blacet schematics   Dave Manley
• [sdiy] Blacet schematics   David G. Dixon
• [sdiy] SSM2164 VCAs   Aaron Lanterman
• [sdiy] SSM2164 VCAs   Tim Parkhurst
• [sdiy] SSM2164 VCAs   David G. Dixon
• [sdiy] SSM2164 VCAs   Scott Juskiw
• Emu SSMs (was Re: [sdiy] A potential problem with a voice-assignable organ)   Scott Nordlund
• [sdiy] SSM2164 VCAs   David G. Dixon
• SSM2044 (was: Re: Emu SSMs (was Re: [sdiy] A potential problem witha voice-assignable organ)   JH.
• [sdiy] SSM2164 VCAs   Tom Wiltshire
• [sdiy] SSM2164 VCAs   George Hearn
• [sdiy] SSM2164 VCAs   Neil Johnson
• [sdiy] SSM2164 VCAs   rob
• [sdiy] SSM2164 VCAs   Tom Adam
• [sdiy] OT: gas powered soldering irons?   Derek Holzer
• [sdiy] OT: gas powered soldering irons?   Dave Magnuson
• [sdiy] OT: gas powered soldering irons?   Derek Holzer
• [sdiy] OT: gas powered soldering irons?   Amos
• [sdiy] OT: gas powered soldering irons?   Derek Holzer
• [sdiy] OT: gas powered soldering irons?   Amos
• [sdiy] OT: gas powered soldering irons?   Tom Wiltshire
• [sdiy] OT: gas powered soldering irons?   Derek Holzer
• [sdiy] OT: gas powered soldering irons?   Andre Majorel
• [sdiy] OT: gas powered soldering irons?   Pete Swarbrick
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   Dave Leith
• [sdiy] OT: gas powered soldering irons?   Altitude
• SV: [sdiy] OT: gas powered soldering irons?   John Alex Hvidlykke
• [sdiy] OT: gas powered soldering irons?   Dave Kendall
• FW: [sdiy] OT: gas powered soldering irons?   Needham, Alan
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   Cynthia Webster
• [sdiy] SSM2164 VCAs   David G. Dixon
• [sdiy] SSM2164 VCAs   David G. Dixon
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   James R. Coplin
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   Dave Leith
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   James R. Coplin
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   Tom Wiltshire
• SV: [sdiy] OT: gas powered soldering irons?   Derek Holzer
• [sdiy] How to continually blend from a parallel connection of the two multi-mode resonating filters?   Dave Leith
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Scott
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Cynthia Webster
• SV: SV: [sdiy] OT: gas powered soldering irons?   John Alex Hvidlykke
• [sdiy] eagle grid snap - changing from imperial to metric, and encountering complications : /   Julian
• [sdiy] OT: gas powered soldering irons?   Randolph Trautvetter
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Dave Leith
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Dave Manley
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Tom Wiltshire
• [sdiy] eagle grid snap - changing from imperial to metric, and encountering complications : /   Tom Bugs
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Dave Leith
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Michael Zacherl.
• [sdiy] How to continually blend from a parallel connection of thetwo multi-mode resonating filters?   Dave Leith
• [sdiy] Need a SPICE model for SSM2164?   David G. Dixon
• [sdiy] Analysis of Buchla 259 amplitude modulation circuit   Aaron Lanterman
• [sdiy] Analysis of Buchla 259 amplitude modulation circuit   Aaron Lanterman
• [sdiy] eagle grid snap - changing from imperial to metric, andencountering complications : /   Jason Tribbeck
• [sdiy] eagle grid snap - changing from imperial to metric, andencountering complications : /   Julian
• SV: [sdiy] OT: gas powered soldering irons?   John Alex Hvidlykke
• [sdiy] eagle grid snap - changing from imperial to metric, andencountering complications : /   Jason Tribbeck
• [sdiy] hum on the outputs   Danjel van Tijn
• [sdiy] eagle grid snap - changing from imperial to metric, andencountering complications : /   Ingo Debus
• [sdiy] eagle grid snap - changing from imperial to metric, andencountering complications : /   Jason Tribbeck
• [sdiy] Classic synth collection in Australia   Tom Wiltshire
• [sdiy] OT: gas powered soldering irons?   Mike Gorman
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Gil W.
• [sdiy] OT: gas powered soldering irons?   Dave Manley
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Samppa Tolvanen
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Gil W.
• [sdiy] Classic synth collection in Australia   Bob Weigel
• [sdiy] Tantalums in Yamaha CS20M/CS40M   David G. Dixon
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Gil W.
• [sdiy] Free broken o'scope - Philips/Fluke PM3070 (UK only)   Tom Bugs
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Bob Weigel
• [sdiy] Free broken o'scope - Philips/Fluke PM3070 (UK only)   Graham Atkins
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Samppa Tolvanen
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Gil W.
• [sdiy] Free broken o'scope - Philips/Fluke PM3070 (UK only)   Tom Bugs
• [sdiy] Re: Free broken o'scope - Philips/Fluke PM3070 (UK only)   Tom Bugs
• FW: [sdiy] Tantalums in Yamaha CS20M/CS40M   Jerry Gray-Eskue
• [sdiy] Classic synth collection in Australia   Michael Zacherl.
• [sdiy] Tantalums in general   John Henson
• [sdiy] Tantalums in Yamaha CS20M/CS40M   Jerry Gray-Eskue
• [sdiy] Tantalums in general   Barry Klein
• [sdiy] Tantalums in general   George Hearn
• [sdiy] Tantalums in general   Sadpaul
• [sdiy] Tantalums in general   Graham Atkins
• [sdiy] Tantalums in general   Jerry Gray-Eskue
• [sdiy] Tantalums in general   Jerry Gray-Eskue
• [sdiy] Tantalums in general   Dave Manley
• [sdiy] Tantalums, ESR   Jerry Gray-Eskue
• [sdiy] Classic synth collection in Australia   Paul Perry
• [sdiy] Tantalums, ESR   Jerry Gray-Eskue
• [sdiy] Tantalums in general   Scott Nordlund
• [sdiy] MCV876 midi to Cv interface - firmware update   m.bareille at free.fr
• [sdiy] Tantalums in general   Steve Carter
• FW: [sdiy] Tantalums in Yamaha CS20M/CS40M   Samppa Tolvanen
• [sdiy] Tantalums in general   Gil W.
• [sdiy] Tantalums, lytics   Ingo Debus
• [sdiy] Tantalums, ESR   Ingo Debus
• [sdiy] Tantalums, lytics   Samppa Tolvanen
• [sdiy] Re: Tantalums, VERY IMPORTANT to all DIYers   Gil W.
• [sdiy] Re: Tantalums, VERY IMPORTANT to all DIYers   David Anderson
• [sdiy] Re: Tantalums, VERY IMPORTANT to all DIYers   Tom Corbitt
• [sdiy] New SSM2164-based Log/Linear VCA design   David G. Dixon
• [sdiy] New SSM2164-based Log/Linear VCA design   David G. Dixon
• [sdiy] Tantalums, lytics   Ingo Debus
• [sdiy] Waveform data wanted   Tom Wiltshire
• [sdiy] Tantalums, lytics   Ingo Debus
• [sdiy] Waveform data wanted   Ingo Debus
• [sdiy] Waveform data wanted   Eric Brombaugh
• [sdiy] Waveform data wanted   Kyle Stephens
• [sdiy] Waveform data wanted   m.bareille at free.fr
• [sdiy] FM Music Thing I Did   Scott Gravenhorst
• Re: [sdiy] Waveform data wanted   rdrake
• [sdiy] Waveform data wanted   Jason Proctor
• [sdiy] Waveform data wanted   Louis van Dompselaar
• [sdiy] Good times with quadrature waves   David G. Dixon
• [sdiy] It's alive!   Aaron Lanterman
• [sdiy] Look at the circuit your son made   Aaron Lanterman
• [sdiy] Whoops! Sorry I meant to send that e-mail to my dad, not SDIY!   Aaron Lanterman
• [sdiy] Whoops! Sorry I meant to send that e-mail to my dad, not SDIY!   cheater cheater
• SV: [sdiy] Whoops! Sorry I meant to send that e-mail to my dad, not SDIY!   John Alex Hvidlykke
• [sdiy] Spring Reverb - Richard Burmer - Gear ID?   cheater cheater
• [sdiy] Calling all Buchla lowpass gate fans   Aaron Lanterman
• [sdiy] Whoops! Sorry I meant to send that e-mail to my dad, not SDIY!   floppy
• [sdiy] Synth DIY UK 2009 update, July 17-19   Neil Johnson
• [sdiy] Good times with quadrature waves   Dave Leith
• [sdiy] Calling all Buchla lowpass gate fans   David Ingebretsen
• [sdiy] EFM SBM   Terje Winther
• [sdiy] Good times with quadrature waves   Tim Parkhurst
• [sdiy] EFM SBM   Julian
• [sdiy] Good times with quadrature waves   Ian Fritz
• [sdiy] EFM SBM   Tom Bugs
• [sdiy] EFM SBM   Sean Ellis
• [sdiy] Good times with quadrature waves   David G. Dixon
• AW: [sdiy] EFM SBM   Matthias Herrmann
• [sdiy] Color Code Jacks   Scott
• [sdiy] Good times with quadrature waves   Neil Johnson
• [sdiy] FM Music Thing I Did   Graham Atkins
• [sdiy] Good times with quadrature waves   Graham Atkins
• [sdiy] FM Music Thing I Did   Scott Gravenhorst
• [sdiy] pinouts for Marshall Time Modulator 5002   Todd Sines
• [sdiy] using the multi-pin connector on Synton SPX-216   Todd Sines
• [sdiy] Calling all Buchla lowpass gate fans   Aaron Lanterman
• [sdiy] Waveform data wanted   Chris Strellis
• [sdiy] using the multi-pin connector on Synton SPX-216   Mike Gorman
• [sdiy] Waveform data wanted   Needham, Alan
• [sdiy] Color Code Jacks   Mike Gorman
• [sdiy] Color Code Jacks   John Luciani
• [sdiy] Waveform data wanted   Chris Strellis
• [sdiy] Color Code Jacks   thx1138
• [sdiy] Color Code Jacks   Scott Juskiw
• [sdiy] Color Code Jacks   David G. Dixon
• [sdiy] About that 4-pole filter...   David G. Dixon
• [sdiy] Waveform data wanted   Needham, Alan
• [sdiy] PPG EVU info?   mark verbos
• [sdiy] PPG EVU info?   Paul Maddox
• [sdiy] Interesting Charge-Pump VCO from Electronic Design magazine   flightofharmony
• [sdiy] Interesting Charge-Pump VCO from Electronic Design magazine   Tim Parkhurst
• [sdiy] Interesting Charge-Pump VCO from Electronic Design magazine   Ian Fritz
• [sdiy] using 6264 Ram   Jerry Gray-Eskue
• [sdiy] using 6264 Ram   Jerry Gray-Eskue
• [sdiy] MIDI to COM port driver   Jerry Gray-Eskue
• [sdiy] using 6264 Ram   Jerry Gray-Eskue
• [sdiy] LT spice runs of the Buchla 191 highpass core   Aaron Lanterman
• [sdiy] Female sdiy'ers   Jerry Gray-Eskue
• [sdiy] using 6264 Ram   Jerry Gray-Eskue
• [sdiy] using 6264 Ram   Jerry Gray-Eskue
• [sdiy] EFM SBM   Keith Winstanley
• [sdiy] Female sdiy'ers   George Hearn
• [sdiy] Female sdiy'ers   Amos
• [sdiy] Female sdiy'ers   Tom Wiltshire
• [sdiy] using 6264 Ram   Dan Snazelle
• [sdiy] using 6264 Ram   Jason Tribbeck
• [sdiy] using 6264 Ram   Dan Snazelle
• [sdiy] using 6264 Ram   Paul Schreiber
• [sdiy] using 6264 Ram   Paul Schreiber
• [sdiy] using 6264 Ram   Dan Snazelle
• [sdiy] Female sdiy'ers   Scott
• [sdiy] MIDI to COM port driver   johnspeth at yahoo.com
• [sdiy] Female sdiy'ers   Ian Fritz
• [sdiy] using 6264 Ram   Dan Snazelle
• [sdiy] using 6264 Ram   m.bareille at free.fr
• [sdiy] Female sdiy'ers   David G. Dixon
• [sdiy] Female sdiy'ers   Aaron Lanterman
• [sdiy] Female sdiy'ers   Aaron Lanterman
• [sdiy] Female sdiy'ers   Paul Schreiber
• [sdiy] Female sdiy'ers   David Ingebretsen
• [SPAM bayesian] - RE: [sdiy] Female sdiy'ers - Bayesian Filter detected spam   Scott
• [sdiy] using 6264 Ram   Dan Snazelle
• [sdiy] powered breadboards?   Dan Snazelle
• [sdiy] using 6264 Ram   David Anderson
• [sdiy] powered breadboards?   Alex Iles
• [sdiy] Female sdiy'ers   Veronica Merryfield
• [SPAM bayesian] - RE: [sdiy] Female sdiy'ers - Bayesian Filter detected spam   Karl Ekdahl
• [sdiy] Female sdiy'ers   Stewart Pye
• [sdiy] Female sdiy'ers   David G. Dixon
• [sdiy] Female sdiy'ers   Graham Atkins
• [sdiy] Female sdiy'ers   Aaron Lanterman
• [sdiy] Female sdiy'ers   thx1138
• [sdiy] Female sdiy'ers   Samppa Tolvanen
• [sdiy] Female sdiy'ers   George Hearn
• [sdiy] Female sdiy'ers   nicolas
• [sdiy] Female sdiy'ers   Amos
• [sdiy] Female sdiy'ers   Amos
• [sdiy] Female sdiy'ers   Samppa Tolvanen
• [sdiy] MIDI to COM port driver   Laurie Biddulph
• [sdiy] Female sdiy'ers   Vesa Lahteenmaki
• [sdiy] Female sdiy'ers   Paul Dickow
• [sdiy] Looking for keyboard circuits   David G. Dixon
• [sdiy] Looking for keyboard circuits   Florian Anwander
• [sdiy] Looking for keyboard circuits   Matthias.Herrmann at jeppesen.com
• [sdiy] Looking for keyboard circuits   Mark Olson
• [sdiy] burst generators   alfred.pear at gmail.com
• [sdiy] burst generators   Bruce
• [sdiy] burst generators   Tim Parkhurst
• [sdiy] burst generators   Scott Gravenhorst
• [sdiy] burst generators   alfred.pear at gmail.com
• [sdiy] Novel SMT mounting technique   Tim Parkhurst
• [sdiy] Diode RF mixer   Cornutt, David K
• [sdiy] Diode RF mixer   aaron zarzutzki
• [sdiy] Novel SMT mounting technique   Dave Manley
• [sdiy] Diode RF mixer   JH.
• [sdiy] TG77 Replacement Display   David J. Hughes
• [sdiy] Diode RF mixer   Derek Holzer
• [sdiy] Female sdiy'ers   Andre Majorel
• [sdiy] Female sdiy'ers   Chris Strellis
• (OT) RE: [sdiy] Female sdiy'ers   Jason Tribbeck
• [sdiy] Female sdiy'ers   Tom Wiltshire
• [sdiy] Spice beginner / Quadrature oscillator   Karl Ekdahl
• [sdiy] Spice beginner / Quadrature oscillator   Neil Johnson
• [sdiy] book on using Ram/eproms/latches, etc?   Dan Snazelle
• [sdiy] book on using Ram/eproms/latches, etc?   John Blacet
• [sdiy] book on using Ram/eproms/latches, etc?   Scott Gravenhorst
• [sdiy] book on using Ram/eproms/latches, etc?   John Luciani
• [sdiy] book on using Ram/eproms/latches, etc?   Dan Snazelle
• [sdiy] book on using Ram/eproms/latches, etc?   David Anderson
• [sdiy] book on using Ram/eproms/latches, etc?   John Luciani
• [sdiy] Spice beginner / Quadrature oscillator   Tim Stinchcombe
• [sdiy] book on using Ram/eproms/latches, etc?   Dan Snazelle
• [sdiy] book on using Ram/eproms/latches, etc?   Dan Snazelle
• [sdiy] build your own z80:was book on using Ram   Dan Snazelle
• [sdiy] build your own z80:was book on using Ram   Louis van Dompselaar
• [sdiy] build your own z80:was book on using Ram   Veronica Merryfield
• [sdiy] build your own z80:was book on using Ram   Samppa Tolvanen
• [sdiy] build your own z80:was book on using Ram   David Ingebretsen
• [sdiy] book on using Ram/eproms/latches, etc?   Samppa Tolvanen
• [sdiy] running SQ10 from midi   Jamie Cresswell
• [sdiy] B.H. Bailey Ring Mod Module   Graheme Wilson
• [sdiy] build your own z80:was book on using Ram   Pavel Kirkovsky
• [sdiy] Female sdiy'ers   Pavel Kirkovsky
• [sdiy] build your own z80:was book on using Ram   Dan Snazelle
• [sdiy] eml polybox schematics/info?   Dan Snazelle
• [sdiy] build your own z80:was book on using Ram   David Panseri
• [sdiy] eml polybox schematics/info?   Samppa Tolvanen
• [sdiy] eml polybox schematics/info?   Dan Snazelle
• [sdiy] eml polybox schematics/info?   Samppa Tolvanen
• [sdiy] running SQ10 from midi   mark verbos
• [sdiy] running SQ10 from midi   David Panseri
• [sdiy] running SQ10 from midi   Samppa Tolvanen
• [sdiy] SSM Trade   Chris Muir
• [sdiy] SSM Trade   Cynthia Webster
• [sdiy] running SQ10 from midi   Jamie Cresswell
• [sdiy] a little OT, but...   Bob Devries
• [sdiy] a little OT, but...   John Luciani
• [sdiy] powered breadboards?   Colin Hinz
• [sdiy] a little OT, but...   Magnus Danielson
• [sdiy] german bananas   Derek Holzer
• [sdiy] PPG EVU info?   Magnus Danielson
• [sdiy] PPG EVU info?   thx1138
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Aaron Lanterman
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   John Loffink
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Tom Farrand
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Cynthia Webster
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Ian Fritz
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the cornerand cries   Julian
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Samppa Tolvanen
• [sdiy] Pots/knobs question   Aaron Lanterman
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Ingo Debus
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   John Luciani
• [sdiy] Pots/knobs question   John Loffink
• [sdiy] Pots/knobs question   thx1138
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the cornerand cries   Jerry Gray-Eskue
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Magnus Danielson
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   David G. Dixon
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the corner and cries   Matthew Smith
• [sdiy] PCB layout mistake = Aaron curls up in a ball in the cornerand cries   Adam Schabtach
• [sdiy] Pots/knobs question   mark verbos
• [sdiy] Any Synth-DIYers in Perth Australia?   David G. Dixon
• [sdiy] Pots/knobs question   Aaron Lanterman
• [sdiy] Pot wattage   Aaron Lanterman
• [sdiy] I'm thinking this alpha series looks good   Aaron Lanterman
• [sdiy] german bananas   Derek Holzer
• [sdiy] german bananas   Ingo Debus
• [sdiy] german bananas   Florian Anwander
• [sdiy] german bananas   Derek Holzer
• [sdiy] german bananas   Michael Zacherl.
• [sdiy] Lopass gate pcbs shipping   thomas white
• [sdiy] MCV876 firmware v3.0x Sysex description file (for MAC users)   m.bareille at free.fr
• [sdiy] german bananas   thx1138
• [sdiy] Pots/knobs question   Chris Muir
• [sdiy] Pots/knobs question   John Loffink
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] New digital synthesis projects under way   Csaba Zvekan
• [sdiy] New digital synthesis projects under way   Tom Wiltshire
• [sdiy] wire wrap for panel mounts   Aaron Lanterman
• [sdiy] german bananas   Pavel Kirkovsky
• [sdiy] wire wrap for panel mounts   thx1138
• [sdiy] wire wrap for panel mounts   David Brown
• [sdiy] wire wrap for panel mounts   thx1138
• [sdiy] wire wrap for panel mounts   David G. Dixon
• [sdiy] german bananas   Needham, Alan
• [sdiy] Synth DIY UK - 1 week left to book rooms   Neil Johnson
• [sdiy] german bananas   Steve Ridley
• [sdiy] Ensoniq ESP Schematics - anyone ?   Gil W.
• [sdiy] Re: [AH] Ensoniq ESP Schematics - anyone ?   Gil W.
• [sdiy] Synth DIY UK - 1 week left to book rooms   Mike Gorman
• [sdiy] looking for old DIY articles with RAM projects   Dan Snazelle
• [sdiy] looking for old DIY articles with RAM projects   Scott Nordlund
• [sdiy] looking for old DIY articles with RAM projects   Dan Snazelle
• [sdiy] looking for old DIY articles with RAM projects   Jean-Pierre Desrochers
• [sdiy] looking for old DIY articles with RAM projects   Scott Nordlund
• [sdiy] looking for old DIY articles with RAM projects   Jean-Pierre Desrochers
• [sdiy] looking for old DIY articles with RAM projects oops..   Jean-Pierre Desrochers
• [sdiy] PPG EVU info?   mark verbos
• [sdiy] looking for old DIY articles with RAM projects   Mike Gorman
• [sdiy] New digital synthesis projects under way   Samppa Tolvanen
• [sdiy] Re: [AH] Ensoniq ESP Schematics - anyone ?   Samppa Tolvanen
• [sdiy] Re: [AH] Ensoniq ESP Schematics - anyone ?   Gil W.
• [sdiy] looking for old DIY articles with RAM projects   Byron G. Jacquot
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] New digital synthesis projects under way   John Luciani
• [sdiy] looking for old DIY articles with RAM projects   Samppa Tolvanen
• [sdiy] Tiny Scope revisited   David Ingebretsen
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] New digital synthesis projects under way   Samppa Tolvanen
• [sdiy] looking for old DIY articles with RAM projects   Neil Johnson
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] Mounting hole size for switch - can't seem to get fromdatasheet   Jerry Gray-Eskue
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Magnus Danielson
• [sdiy] looking for old DIY articles with RAM projects   Magnus Danielson
• [sdiy] FracRack Rack sources?   David Ingebretsen
• [sdiy] LED won't light up :(   Aaron Lanterman
• [sdiy] preferred noise source circuits   David G. Dixon
• [sdiy] LED won't light up :(   Stewart Pye
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Needham, Alan
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] Tiny Scope revisited   Tom Bugs
• [sdiy] looking for old DIY articles with RAM projects   Florian Anwander
• [sdiy] looking for old DIY articles with RAM projects   Louis van Dompselaar
• [sdiy] preferred noise source circuits   Tom Wiltshire
• [sdiy] preferred noise source circuits   Derek Holzer
• [sdiy] preferred noise source circuits   Derek Holzer
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Needham, Alan
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] good books/sites for synth electronics   Jamie Cresswell
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] good books/sites for synth electronics   BrightBoy
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   Louis van Dompselaar
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   Chris Strellis
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   Florian Anwander
• [sdiy] Interesting filter chip - UAF42?   Karl Ekdahl
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   m.bareille at free.fr
• [sdiy] preferred noise source circuits   Tom Wiltshire
• [sdiy] good books/sites for synth electronics   Aaron Lanterman
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Aaron Lanterman
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   Rainer Buchty
• [sdiy] Video of my Music Easel LPG adaptation   Aaron Lanterman
• [sdiy] good books/sites for synth electronics   Ian Fritz
• [sdiy] Lopass Gate Pcbs Shipping Phase 1   thomas white
• [sdiy] good books/sites for synth electronics   Horton
• [sdiy] Tiny Scope revisited   David Ingebretsen
• [sdiy] Desoldering DIL packages   Rainer Buchty
• [sdiy] Desoldering DIL packages   Scott Nordlund
• [sdiy] good books/sites for synth electronics   Tim Parkhurst
• [sdiy] Interesting filter chip - UAF42?   Loscha
• [sdiy] good source for OLD SRAM?   Dan Snazelle
• [sdiy] good source for OLD SRAM?   thx1138
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] good source for OLD SRAM?   Scott Gravenhorst
• [sdiy] SRAM versus DRAM   Scott Gravenhorst
• [sdiy] good source for OLD SRAM?   Dave Manley
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] SRAM versus DRAM   Dave Manley
• [sdiy] SRAM versus DRAM   John Luciani
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] SRAM versus DRAM   John Luciani
• [sdiy] SRAM versus DRAM   mark verbos
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] SRAM versus DRAM   Dave Manley
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] SRAM versus DRAM   Scott Nordlund
• [sdiy] SRAM versus DRAM   Dave Manley
• [sdiy] SRAM versus DRAM   Dave Manley
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   Louis van Dompselaar
• [sdiy] SRAM versus DRAM   Magnus Danielson
• [sdiy] SRAM versus DRAM   Chris Strellis
• [sdiy] good source for OLD SRAM?   Florian Anwander
• [sdiy] SRAM versus DRAM   Tom Wiltshire
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] SRAM versus DRAM   Dan Snazelle
• [sdiy] from timing to circuit /was SRAM versus DRAM   Dan Snazelle
• [sdiy] to banana or not to banana   Derek Holzer
• [sdiy] Doepfer Sound Sampler / Elektor Quantizer   Mike Gorman
• [sdiy] Stuck mixer pots and reverb - two queries and an observation   Electronic Battle
• [sdiy] from timing to circuit /was SRAM versus DRAM   Dave Manley
• [sdiy] MFOS Soundlab Oscillators not oscillating   James R. Coplin
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Derek Holzer
• [sdiy] to banana or not to banana   Cynthia Webster
• [sdiy] to banana or not to banana   Derek Holzer
• [sdiy] to banana or not to banana   Chris Muir
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Tom Wiltshire
• [sdiy] to banana or not to banana   Seb Francis
• [sdiy] to banana or not to banana   Tom Bugs
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Adam Schabtach
• [sdiy] Stuck mixer pots and reverb - two queries and an observation   Samppa Tolvanen
• [sdiy] LED won't light up :(   Magnus Danielson
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Cynthia Webster
• [sdiy] SRAM versus DRAM   Andre Majorel
• SV: [sdiy] Stuck mixer pots and reverb - two queries and an observation   John Alex Hvidlykke
• RES: [sdiy] Synthacon/Steiner-Parker VCF inputs   Luis Marka
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Ian Fritz
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Laurie Biddulph
• [sdiy] Re: Stuck mixer pots and reverb - two queries and an observation   Electronic Battle
• [sdiy] Synthacon/Steiner-Parker VCF inputs   Derek Holzer
• [sdiy] to banana or not to banana   Scott Nordlund
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Cynthia Webster
• [sdiy] Re: Stuck mixer pots and reverb - two queries and an observation   Eric Wood
• [sdiy] Re: Stuck mixer pots and reverb - two queries and an observation   Samppa Tolvanen
• [sdiy] to banana or not to banana   Stewart Pye
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Derek Holzer
• [sdiy] to banana or not to banana   Elby Designs - Laurie Biddulph
• [sdiy] to banana or not to banana   Chris Muir
• [sdiy] Stuck mixer pots and reverb - two queries and an observation   David Anderson
• [sdiy] Sequencers   David Ingebretsen
• [sdiy] test   peter edwards
• [sdiy] Sequencers   Suit & Tie Guy
• [sdiy] Another board working!   Aaron Lanterman
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] to banana or not to banana   Aaron Lanterman
• [sdiy] to banana or not to banana   Chris Muir
• [sdiy] to banana or not to banana   Neil Johnson
• [sdiy] to banana or not to banana   Neil Johnson
• [sdiy] Re: Stuck mixer pots and reverb - two queries and an observation   Florian Anwander
• [sdiy] Contacting Dana Scott (ARP)   Dave Leith
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Adam Schabtach
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Derek Holzer
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Aaron Lanterman
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Cynthia Webster
• [Fwd: Re: RES: [sdiy] Synthacon/Steiner-Parker VCF inputs]   Derek Holzer
• [sdiy] to banana or not to banana   Stewart Pye
• [sdiy] to banana or not to banana   Cynthia Webster
• [sdiy] More stuff for sale - isn't Servo done yet?   Tim Parkhurst
• [sdiy] build your own z80:was book on using Ram   David Snowdon
• [sdiy] bugbook /was book on using Ram   Dan Snazelle
• [sdiy] to banana or not to banana   Magnus Danielson
• [sdiy] the new disco & heavy objects & gravity (was: to banana or not to banana)   Aaron Lanterman
• [sdiy] to banana or not to banana   Amos
• [sdiy] to banana or not to banana   Chris Muir
• [sdiy] Pots/knobs question   Chris Muir
• [sdiy] Kurzweil K2000 Query   DTK
• [sdiy] Joystix   Bruce Duncan
• [sdiy] preferred noise source circuits   Adam Schabtach
• [sdiy] ARP 2600 VCA - 4019 module   Dave Leith
• [sdiy] preferred noise source circuits   David G. Dixon
• [sdiy] Kurzweil K2000 Query   Dave Kendall
• [sdiy] Kurzweil K2000 Query *clarification*   Dave Kendall
• [sdiy] Joystix   Jamie Cresswell
• [sdiy] 36dB variable slope filter / phaser adjustment procedure online   JH.
• [sdiy] ... and finally the "small" BOM for the filter only, without phasing and modulation   JH.
• [sdiy] quick 13700 question   Dan Snazelle
• [sdiy] Can I use two 1/4w resistors instead of one 1/2w ?   Gil W.
• [sdiy] quick 13700 question   Ray Wilson
• [sdiy] quick 13700 question   Ian Fritz
• [sdiy] quick 13700 question   Ray Wilson
• [sdiy] Joystick optical encoders   Karl Ekdahl
• [sdiy] quick 13700 question   René Schmitz
• RE: [sdiy] preferred noise source circuits   rdrake
• [sdiy] preferred noise source circuits   Tom Bugs
• [sdiy] WTB... MKS-7 white / black rack ears   Todd Sines
• [sdiy] WTB... MKS-7 white / black rack ears   Graham Atkins
• [sdiy] test   aerogramma
• [sdiy] quick 13700 question   Dan Snazelle
• [sdiy] preferred noise source circuits   aerogramma
• [sdiy] Joystick optical encoders   Aaron Lanterman
• [sdiy] All lopass gate boards have shipped!   thomas white
• [sdiy] preferred noise source circuits   Tim Daugard
• [sdiy] preferred noise source circuits   Seb Francis
• [sdiy] preferred noise source circuits   Barry Klein
• [sdiy] preferred noise source circuits   aerogramma
• [sdiy] preferred noise source circuits   Aaron Lanterman
• [sdiy] WTB... MKS-7 white / black rack ears   Ben Lincoln
• [sdiy] preferred noise source circuits   Tom Wiltshire
• [sdiy] Left over transistor in a transistor array   David Ingebretsen
• [sdiy] Buchla 144 dual square wave oscillator   Jerry Gray-Eskue
• [sdiy] Buchla designs   Jerry Gray-Eskue
• [sdiy] WTB... MKS-7 white / black rack ears   Todd Sines
• [sdiy] speaking of drilling... Small drill press recommendations?   Todd Sines
• [sdiy] Left over transistor in a transistor array   Scott Nordlund
• [sdiy] preferred noise source circuits   Scott Nordlund
• [sdiy] Left over transistor in a transistor array   Magnus Danielson
• [sdiy] preferred noise source circuits   Aaron Lanterman
• RES: [sdiy] Left over transistor in a transistor array   Luís Marka
• [sdiy] Left over transistor in a transistor array   Magnus Danielson
• [sdiy] preferred noise source circuits   Amos
• [sdiy] speaking of drilling... Small drill press recommendations?   Scott
• [sdiy] puff of smoke! (MB-808 build)   Danjel van Tijn
• [sdiy] speaking of drilling... Small drill press recommendations?   Mark Olson
• [sdiy] speaking of drilling... Small drill press recommendations?   Andre Majorel
• [sdiy] the new disco & heavy objects & gravity   Magnus Danielson
• [sdiy] speaking of drilling... Small drill press recommendations?   Romeo Fahl
• [sdiy] quick 13700 question   Magnus Danielson
• [sdiy] WTB... MKS-7 white / black rack ears   Bob Weigel
• [sdiy] speaking of drilling... Small drill press recommendations?   Karl Ekdahl
• [sdiy] speaking of drilling... Small drill press recommendations?   Graham Atkins
• [sdiy] speaking of drilling... Small drill press recommendations?   David G. Dixon
• [sdiy] speaking of drilling... Small drill press recommendations?   Julian
• [sdiy] Pots/knobs question   Chris Muir
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] OT: how to save a dead Raided Drive?   Tom Corbitt
• [sdiy] OT: how to save a dead Raided Drive?   BrightBoy
• [sdiy] OT: how to save a dead Raided Drive?   Scott Nordlund
• [sdiy] OT: how to save a dead Raided Drive?   Ben Lincoln
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] OT: how to save a dead Raided Drive?   db
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] OT: how to save a dead Raided Drive?   aerogramma
• [sdiy] OT: how to save a dead Raided Drive?   Doug Terrebonne
• [sdiy] OT: how to save a dead Raided Drive?   Samppa Tolvanen
• [sdiy] OT: how to save a dead Raided Drive?   Phillip L. Harbison
• [sdiy] OT: how to save a dead Raided Drive?   Phillip L. Harbison
• [sdiy] OT: how to save a dead Raided Drive?   Samppa Tolvanen
• [sdiy] OT: how to save a dead Raided Drive?   Michael Zacherl.
• [sdiy] speaking of drilling... Small drill press recommendations?   Neil Johnson
• [sdiy] ARP 2600 VCA - 4019 module   rob
• [sdiy] Korg M1 schematics - anyone ?   Gil W.
• [sdiy] OT: how to save a dead Raided Drive?   Andre Majorel
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] OT: how to save a dead Raided Drive?   aerogramma
• [sdiy] OT: how to save a dead Raided Drive?   Samppa Tolvanen
• [sdiy] OT: how to save a dead Raided Drive?   Samppa Tolvanen
• [sdiy] Re: [AH] Korg M1 schematics FOUND   Gil W.
• [sdiy] Korg M1 schematics - FOUND   Gil W.
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] speaking of drilling... Small drill press recommendations?   Scott
• [sdiy] speaking of drilling... Small drill press recommendations?   Aaron Lanterman
• [sdiy] ARP 2600 VCA - 4019 module   Dave Manley
• [sdiy] speaking of drilling... Small drill press recommendations?   Scott
• [sdiy] speaking of drilling... Small drill press recommendations?   David G. Dixon
• [sdiy] speaking of drilling... Small drill press recommendations?   David G. Dixon
• [sdiy] puff of smoke! (MB-808 build)   Danjel van Tijn
• [sdiy] OT: how to save a dead Raided Drive?   Tim Parkhurst
• [sdiy] Talking of panels.... (was: Small drill press recommendations)   Julian
• [sdiy] lasertran (was - speaking of drilling... Small drill press recommendations?)   Scott
• [sdiy] Making slots for sliders   Aaron Lanterman
• [sdiy] OT: how to save a dead Raided Drive?   Adam Schabtach
• [sdiy] speaking of drilling... Small drill press recommendations?   Tim Parkhurst
• [sdiy] Making slots for sliders   Cynthia Webster
• [sdiy] Talking of panels.... (was: Small drill press recommendations)   Aaron Lanterman
• [sdiy] FPE prices = HOLY SMOKES   Jerry Gray-Eskue
• [sdiy] Talking of panels.... (was: Small drill press recommendations)   Samppa Tolvanen
• [sdiy] speaking of drilling... Small drill press recommendations?   Andre Majorel
• [sdiy] Talking of panels.... (was: Small drill pressrecommendations)   Julian
• [sdiy] Talking of panels.... (was: Small drill press recommendations)   Julian
• [sdiy] speaking of drilling... Small drill press recommendations?   Scott
• [sdiy] Talking of panels.... (was: Small drill pressrecommendations)   Laurie Biddulph
• [sdiy] speaking of drilling... Small drill press recommendations?   Graham Atkins
• [sdiy] speaking of drilling... Small drill press recommendations?   Jason Proctor
• [sdiy] speaking of drilling... Small drill press recommendations?   Graham Atkins
• [sdiy] Talking of panels.... (was: Small drill pressrecommendations)   Julian
• [sdiy] speaking of drilling... Small drill press recommendations?   Scott
• [sdiy] lasertran (was - speaking of drilling... Small drill press recommendations?)   flightofharmony
• [sdiy] lasertran (was - speaking of drilling... Small drillpress recommendations?)   Julian
• [sdiy] Talking of panels.... (was: Small drill pressrecommendations)   Julian
• [sdiy] Music Easel sliders determined to be linear   Aaron Lanterman
• [sdiy] FPE prices = HOLY SMOKES   Jerry Gray-Eskue
• [sdiy] Talking of panels.... (was: Small drill pressrecommendations)   Samppa Tolvanen
• [sdiy] List rules   David Ingebretsen
• [sdiy] List rules   Aaron Lanterman
• [sdiy] speaking of drilling... Small drill press recommendations?   Aaron Lanterman
• [sdiy] List rules   Eric Brombaugh
• Workign PCB and module Tellun-867/OScope combo -- RE: [sdiy] List rules   David Ingebretsen
• FW: [sdiy] FPE prices = HOLY SMOKES   Jerry Gray-Eskue
• [sdiy] List rules   Michael Zacherl.
• [sdiy] Music Easel sliders determined to be linear   mark verbos
• [sdiy] Dual MFOS ADSR layouts   Jerry Gray-Eskue
• [sdiy] Korg M1 schematics - HERE   Gil W.
• [sdiy] Making slots for sliders   Tom Bugs
• [sdiy] OT: how to save a dead Raided Drive?   Andre Majorel
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] Korg M1 schematics - HERE   Gil W.
• [sdiy] OT: how to save a dead Raided Drive?   Rainer Buchty
• [sdiy] puff of smoke! (MB-808 build)   David G. Dixon
• [sdiy] speaking of drilling... Small drill press recommendations?   David G. Dixon
• [sdiy] puff of smoke! (MB-808 build)   Danjel van Tijn
• [sdiy] speaking of drilling... Small drill press recommendations?   David G. Dixon
• [sdiy] puff of smoke! (MB-808 build)   Aaron Lanterman
• [sdiy] On shielded cable (or not) for audio   Jerry Gray-Eskue
• [sdiy] Multiplier vs VCA   Derek Holzer
• [sdiy] Multiplier vs VCA   Scott Gravenhorst
• [sdiy] Multiplier vs VCA   Derek Holzer
• [sdiy] Multiplier vs VCA   Derek Holzer
• [sdiy] Music Easel sliders determined to be linear   mark verbos
• [sdiy] Music Easel sliders determined to be linear   mark verbos
• [sdiy] Here's a link WAS: RE: Working PCB and module Tellun-867/OScope combo   David Ingebretsen
• [sdiy] puff of smoke! (MB-808 build)   Tim Parkhurst
• AW: [sdiy] Making slots for sliders   Matthias Herrmann
• [sdiy] Choosing a DAC   Jerry Gray-Eskue
• [sdiy] Dave Brown's CVS module group PCB buy?   David Ingebretsen
• [sdiy] For Sale: DPDT Toggle Switches   Justin Owen
• [sdiy] For Sale: DPDT Toggle Switches   Graham Atkins
• [sdiy] For Sale: DPDT Toggle Switches   Justin Owen
• [sdiy] Multiplier vs VCA   Tim Daugard
• [sdiy] Multiplier vs VCA   Derek Holzer
• [sdiy] Multiplier vs VCA   Tim Daugard
• [sdiy] Choosing a DAC   Jerry Gray-Eskue
• [sdiy] Choosing a DAC   Jerry Gray-Eskue
• [sdiy] Choosing a DAC   Jerry Gray-Eskue
• [sdiy] Book Offer   Phil Macphail
• [sdiy] Book Offer   Phil Macphail
• [sdiy] Choosing a DAC   Jerry Gray-Eskue
• [sdiy] latched input 8 bit DAC to replace ZN428?   Dan Snazelle
• [sdiy] latched input 8 bit DAC to replace ZN428?   Tom Wiltshire
• [sdiy] OT: how to save a dead Raided Drive?   jure zitnik
• [sdiy] OT: how to save a dead Raided Drive?   Dan Snazelle
• [sdiy] OT: how to save a dead Raided Drive?   David Panseri
• [sdiy] OT: Blackboards   David Panseri
• [sdiy] OT: Blackboards   Nathan M. Reeves
• [sdiy] OT: Blackboards   David Panseri
• [sdiy] latched input 8 bit DAC to replace ZN428?   Pete Swarbrick
• [sdiy] OT: Blackboards   Paul Schreiber
• [sdiy] OT: Blackboards   David Panseri
• whoops! [sdiy] latched input 8 bit DAC to replace ZN428?   Pete Swarbrick
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Aaron Lanterman
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Danjel van Tijn
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Danjel van Tijn
• [sdiy] OT: Blackboards   Tom Wiltshire
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Justin Owen
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Tim Parkhurst
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Cynthia Webster
• [sdiy] Alpha Sliders (Making slots for sliders)   Tom Bugs
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Graham Atkins
• [sdiy] Mounting hole size for switch - can't seem to get fromdatasheet   David G. Dixon
• [sdiy] OT: Blackboards   Aaron Lanterman

Last message date: Tue Jun 30 22:56:19 CEST 2009
Archived on: Fri Apr 1 13:39:24 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...