[sdiy] speaking of drilling... Small drill press recommendations?

[Jason Proctor]

the top row of the mults in the middle, at least, is off.

but i like it. make new stuff look like old Serge! :-)

exact placement on a module's controls makes it sound surgical...



>You must have a better eye than me, because I don't see it.  Only 
>one I see off is in the row of 8 at the bottom of the gate sequencer.
>But, even that one, there's enough play on those holes to move the 
>jack a mm one way or the other.  I just don't care enough.  I have 
>100 more modules to finish and I keep getting more PCB's
>
>But, I did mention in that email if I was doing it for someone else, 
>sure I'd punch the holes.  But, doing each hole in one shot vs the 3 
>or even MORE that some were talking about saved me days of work on 
>that panel.  And, it's good enough for me! 
>
>U've got to figure the fate of almost all of our synths will be the 
>city dump.  Who in the general public (besides the few here) would 
>have any idea what these machines w/ jacks and knobs do.  We'll be 
>dead, our kid or grandkid will plug it in w/out any cables, and it 
>won't do anything...
>into the trash w/ it.
>(there are enough stories here of people finding them in the trash, 
>or for virtually free cause people don't know what they are)
>
>Guess it depends what you're going for, but close to perfect, better 
>quality work than anyone I have ever met in person, is good enough 
>for me :)