[sdiy] speaking of drilling... Small drill press recommendations?

[David G. Dixon]

I'm going to switch to Lasertran.  The DecalPro thing isn't working for me
very well.  It's very tricky to do, and even in the best of circumstances,
little bits of the graphic don't transfer.

Live and learn!


> Lasertran, printed in mirror and then baked onto the panels.  Then I
> sprayed lacquer over the top.
> 
> Let me know if you need more info than that, and I'll look through my
> bookmarks for links to the process.
> 
> Scott
> 
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
> bounces at dropmix.xs4all.nl] On Behalf Of Aaron Lanterman
> Sent: Saturday, June 27, 2009 11:27 AM
> To: Synth DIY
> Subject: Re: [sdiy] speaking of drilling... Small drill press
> recommendations?
> 
> 
> On Jun 27, 2009, at 11:54 AM, Scott wrote:
> 
> > Here's the first thing I drilled w/ my new press and I didn't center
> > punch or pilot hole anything (other than a few extra large holes
> > where I did start w/ a pilot)
> > http://www.sdiy.org/wicked1/images/seqpanel.jpg
> 
> Nice! How did you do the labeling?
> 
> - Aaron
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy