[sdiy] speaking of drilling... Small drill press recommendations?

[Scott]

Lasertran, printed in mirror and then baked onto the panels.  Then I sprayed lacquer over the top.

Let me know if you need more info than that, and I'll look through my bookmarks for links to the process.

Scott

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Aaron Lanterman
Sent: Saturday, June 27, 2009 11:27 AM
To: Synth DIY
Subject: Re: [sdiy] speaking of drilling... Small drill press recommendations?


On Jun 27, 2009, at 11:54 AM, Scott wrote:

> Here's the first thing I drilled w/ my new press and I didn't center  
> punch or pilot hole anything (other than a few extra large holes  
> where I did start w/ a pilot)
> http://www.sdiy.org/wicked1/images/seqpanel.jpg

Nice! How did you do the labeling?

- Aaron
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy