[sdiy] WTB... MKS-7 white / black rack ears

[Todd Sines]

Just called, they are out. :(

dimensions, please. I hate drilling this stuff by hand but I might  
have no other option.


+odd
--
On Jun 26, 2009, at 1:57 PM, Ben Lincoln wrote:

> I've got an MKS-7 with ears that I can measure tonight if no one else
> knows the specs. I ordered the ears from Roland back in 1999 - If they
> still carry them, that would be ideal, as they're the most heavy- 
> duty rack
> ears I've ever seen for musical gear (probably due to the depth of the
> MKS-7 case).
>
> On Fri, June 26, 2009 8:43 am, Graham Atkins wrote:
>> Hi Todd,
>>
>> The rack standard is for the total width including rack brackets to  
>> be
>> 19". Unfortunately I don't think there is a standard for the box in
>> between so long as it is
>> within the rack strips so there are different rack ears which is a
>> little annoying, especially if you buy used gear where they have been
>> lost.
>>
>> Graham
>>
>> On 26 Jun 2009, at 16:08, Todd Sines wrote:
>>
>>> I've just about had it drilling aluminum channel aimlessly, and I
>>> only need 2, so it's silly to go to a machine shop for this  [or is
>>> it?]
>>>
>>> The rack ears are about 1" wide on both sides.. if you have anything
>>> near it .. let me know. I was recently given some that were 1.125"
>>> wide and they didn't work; maybe the smaller the better..
>>>
>>> Thanks!
>>>
>>>
>>> +odd
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy