[sdiy] WTB... MKS-7 white / black rack ears

[Ben Lincoln]

I've got an MKS-7 with ears that I can measure tonight if no one else
knows the specs. I ordered the ears from Roland back in 1999 - If they
still carry them, that would be ideal, as they're the most heavy-duty rack
ears I've ever seen for musical gear (probably due to the depth of the
MKS-7 case).

On Fri, June 26, 2009 8:43 am, Graham Atkins wrote:
> Hi Todd,
>
> The rack standard is for the total width including rack brackets to be
> 19". Unfortunately I don't think there is a standard for the box in
> between so long as it is
> within the rack strips so there are different rack ears which is a
> little annoying, especially if you buy used gear where they have been
> lost.
>
> Graham
>
> On 26 Jun 2009, at 16:08, Todd Sines wrote:
>
>> I've just about had it drilling aluminum channel aimlessly, and I
>> only need 2, so it's silly to go to a machine shop for this  [or is
>> it?]
>>
>> The rack ears are about 1" wide on both sides.. if you have anything
>> near it .. let me know. I was recently given some that were 1.125"
>> wide and they didn't work; maybe the smaller the better..
>>
>> Thanks!
>>
>>
>> +odd
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>