[sdiy] Synthacon/Steiner-Parker VCF inputs

[Cynthia Webster]

Heartily Agreed!  (Don't throw away the coolest and most unique part of 
the circuit!)

Cynthia


Adam Schabtach wrote:
> Oh, no! Don't do that!
>
> Well, okay, do it if you want to, but if you do, you're missing out on half
> the fun of that circuit. See, you can plug different signals into the
> different inputs and then the filter acts sort of like a frequency-dependent
> mixer, where the frequency control varies the blend of the two or three
> input signals. It's a unique effect and arguably one of the reasons to have
> the filter in your system at all, because frankly there are many
> better-sounding filters out there.
>
> Just my $0.02 worth, of course. Also note that I built my filter from the
> Catgirl PCB rather than Marc's, and I don't know how they differ. 
>
> --Adam
>
>   
>> -----Original Message-----
>> From: synth-diy-bounces at dropmix.xs4all.nl 
>> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Derek Holzer
>> Sent: Wednesday, June 24, 2009 10:31 AM
>> To: Synth-diy at dropmix.xs4all.nl
>> Subject: [sdiy] Synthacon/Steiner-Parker VCF inputs
>>
>> I'm using Marc Bareille's PCB for the 
>> Synthacon/Steiner-Parker VCF clone. It has separate inputs 
>> for the HP, BP and LP inputs and a common output. Since I 
>> only intend to use one type of filter at a time, I plan to 
>> use a switch to change which part of the filter core the 
>> input signal goes to.
>>     
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>