[sdiy] running SQ10 from midi

[Jamie Cresswell]

Thanks everyone for the helpful info. I will give this a go as soon as I get the transistor. 
cheers very much
jamie 
--- On Fri, 19/6/09, David Panseri <dpanseri at gmail.com> wrote:

> From: David Panseri <dpanseri at gmail.com>
> Subject: Re: [sdiy] running SQ10 from midi
> To: "mark verbos" <mverbos at earthlink.net>
> Cc: "Jamie Cresswell" <zenke at yahoo.com>, synth-diy at dropmix.xs4all.nl
> Date: Friday, 19 June, 2009, 5:45 PM
> Indeed. Here's another version of
> that same circuit. It's a little
> more clear than the ascii versions:
> 
> http://www.doepfer.de/faq/gen_faq.htm#S-Trig
> 
> -Dave
> 
> On Fri, Jun 19, 2009 at 12:11 PM, mark verbos<mverbos at earthlink.net>
> wrote:
> > The korg wants an S-trigger. A gate is actually a
> V-trigger. Try this.
> >
> > http://machines.hyperreal.org/categories/do-it-yourself/schematics/S-Trigger.convertor.txt
> >
> >
> > I build some of these inside of 1/4" plugs.
> >
> > Mark
> >
> >
> > On Jun 19, 2009, at 5:14 AM, Jamie Cresswell wrote:
> >
> >>
> >> Hi all
> >> I have an SQ 10 sequencer and have also a doepfer
> MSY2 midi to sync unit.
> >> I had hoped that the clock out would work to run
> the SQ 10 but it does not.
> >> does anyone have a simple circuit to convert this
> sync trig to an s trigger
> >> which the SQ uses. I know of the trick of running
> it through the ESP of the
> >> MS20 but I want to keep that clear for other use.
> >>
> >> thanks
> >>
> >> z
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Synth-diy mailing list
> >> Synth-diy at dropmix.xs4all.nl
> >> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
>