[sdiy] running SQ10 from midi

[David Panseri]

Indeed. Here's another version of that same circuit. It's a little
more clear than the ascii versions:

http://www.doepfer.de/faq/gen_faq.htm#S-Trig

-Dave

On Fri, Jun 19, 2009 at 12:11 PM, mark verbos<mverbos at earthlink.net> wrote:
> The korg wants an S-trigger. A gate is actually a V-trigger. Try this.
>
> http://machines.hyperreal.org/categories/do-it-yourself/schematics/S-Trigger.convertor.txt
>
>
> I build some of these inside of 1/4" plugs.
>
> Mark
>
>
> On Jun 19, 2009, at 5:14 AM, Jamie Cresswell wrote:
>
>>
>> Hi all
>> I have an SQ 10 sequencer and have also a doepfer MSY2 midi to sync unit.
>> I had hoped that the clock out would work to run the SQ 10 but it does not.
>> does anyone have a simple circuit to convert this sync trig to an s trigger
>> which the SQ uses. I know of the trick of running it through the ESP of the
>> MS20 but I want to keep that clear for other use.
>>
>> thanks
>>
>> z
>>
>>
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>