[sdiy] Color Code Jacks

[Mike Gorman]

Scott,

I came across this blog at the weekend:

http://www.elanhickler.com/blogger/2009/03/color-coding-your-washers.html

It appears that painting the nuts for the jacks is problematic, but painting
the washers works better.

Regards

Mike Gorman

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Scott
Sent: 14 June 2009 22:45
To: SDIY
Subject: [sdiy] Color Code Jacks

Has anyone color coded their jacks for in/out, or whatever, and if so, could
you give me some advice?
I'm thinking I could paint the nuts or washers on the jacks, but don't know
how that would hold up.  So far, that's the best I can come up with, as far
as how it will look.
Possibly could cut new washers out of plastic or something, but I don't
think that would look very professional.  I'd probably use a razor/exacto
knife to cut it, and it would leave rough edges, etc.

Thanks for any help.

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy