[sdiy] Waveform data wanted

[Needham, Alan]

Digisound ROM ...
I remember wading through that to plot the waveforms - ONE (I forget
which- Ill look it up) has a bad byte in the copy I have - anybody else
seen that?

	Alan

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Chris Strellis
Sent: 15 June 2009 12:29
To: Tom Wiltshire; SDIY DIY
Subject: RE: [sdiy] Waveform data wanted

Try Paul Maddox's Monowave waveform EPROM.  It's full of
Digisound/PPG/SQ80/DW8000 and other waveforms.

http://www.vacoloco.net/synths/monowave/downloads/pao.zip

from

http://www.vacoloco.net/synths/monowave/downloads.shtml

I also have the Digisound VCDO data as a separate file.

Cheers

Chris

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

Centrica plc

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England and Wales No 3033654