[sdiy] using the multi-pin connector on Synton SPX-216

[Mike Gorman]

Todd,

I suspect this is a DIN 41612 96 way connector that only has 32 pins
populated.

The closest Mouser item I found was:

http://www.mouser.com/Search/Refine.aspx?Keyword=617-09-03-132-6921

Hope this helps.

Regards

Mike Gorman

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Todd Sines
Sent: 15 June 2009 05:23
To: analogue heaven
Cc: sdiy
Subject: [sdiy] using the multi-pin connector on Synton SPX-216

also -
anyone have a part number for Mouser / Digi-Key as to what lovely jack  
is used in the back of the Synton SPX-216? It's a 32-pin connector  
that isn't some SCSI or centronics cable.. so.. Have any of you tried  
to build the patch point thing [diagrammed in the back of the user  
manual] for using the SPX-216? Sounds insane.

thanks so much.

PS CC off list, thank you.


+odd



_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy