July 2009 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jul 1 00:38:22 CEST 2009
Ending: Fri Jul 31 23:29:44 CEST 2009
Messages: 932

• [sdiy] OT: Blackboards   David Ingebretsen
• [sdiy] OT: Blackboards   Dave Manley
• [sdiy] OT: Blackboards   Adam Schabtach
• [sdiy] Joystick optical encoders   Gergo Palatinszky
• [sdiy] Seeking banana and 3.5 mm (i.e. 1/8") jack recommendations   Aaron Lanterman
• [sdiy] Johnson/Emerson jacks   Aaron Lanterman
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Justin Owen
• [sdiy] Johnson/Emerson jacks   Chris Muir
• [sdiy] Seeking banana and 3.5 mm (i.e. 1/8") jack recommendations   Chris Muir
• [sdiy] Mounting hole size for switch - can't seem to get fromdatasheet   Jason Tribbeck
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Graham Atkins
• [sdiy] OT: Blackboards   David Betz
• [sdiy] OT: Blackboards   Suit & Tie Guy
• [sdiy] Mounting hole size for switch - can't seem to get from datasheet   Neil Johnson
• [sdiy] Synth DIY UK 2009 last room call   Neil Johnson
• [sdiy] Johnson/Emerson jacks   Cynthia Webster
• [sdiy] Seeking banana and 3.5 mm (i.e. 1/8") jack recommendations   Aaron Lanterman
• [sdiy] Looking for keyboard circuits   David G. Dixon
• [sdiy] Johnson/Emerson jacks   Oren Leavitt
• [sdiy] Seeking banana and 3.5 mm (i.e. 1/8") jack recommendations   Chris Muir
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Aaron Lanterman
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Chris Muir
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   flightofharmony
• [sdiy] Long "Doepfer" cables   David Ingebretsen
• [sdiy] Johnson/Emerson jacks   Anthony Bisset
• [sdiy] Where to get *new* keyboard assemblies?   Karl Ekdahl
• [sdiy] Where to get *new* keyboard assemblies?   Amos
• [sdiy] Where to get *new* keyboard assemblies?   Joe Grisso
• [sdiy] Where to get *new* keyboard assemblies?   Graham Atkins
• [sdiy] Where to get *new* keyboard assemblies?   Graham Atkins
• [sdiy] Where to get *new* keyboard assemblies?   GEORGE HEARN
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Chris Muir
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Graham Atkins
• [sdiy] Synth DIY UK 2009 last room call   Magnus Danielson
• [sdiy] Synth DIY UK 2009 last room call   Jason Tribbeck
• [sdiy] Long "Doepfer" cables   Julian
• [sdiy] Synth DIY UK 2009 last room call   Magnus Danielson
• [sdiy] Long "Doepfer" cables   Julian
• [sdiy] Long "Doepfer" cables   Tom Bugs
• [sdiy] Synth DIY UK 2009 last room call   Neil Johnson
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Neil Johnson
• [sdiy] quick 13700 question   Antti Huovilainen
• [sdiy] Long "Doepfer" cables   Andre Majorel
• [sdiy] Where to get *new* keyboard assemblies?   thx1138
• [sdiy] Synth DIY UK 2009 last room call   Dave Manley
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   David G. Dixon
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Cary Roberts
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Graham Atkins
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Cary Roberts
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Samppa Tolvanen
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   David Ingebretsen
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   mark verbos
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Chris Muir
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   mark verbos
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Chris Muir
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   mark verbos
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   David G. Dixon
• [sdiy] 0.141" vs 0.125" jacks (was: 1/8" jack recommendations)   Cary Roberts
• [sdiy] Thank you for all the hardware advice   Aaron Lanterman
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   David G. Dixon
• [sdiy] Tapped Pots?   Tom Bugs
• [sdiy] Tapped Pots?   Louis van Dompselaar
• [sdiy] Tapped Pots?   Samppa Tolvanen
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Justin Owen
• [sdiy] Tapped Pots?   m.bareille at free.fr
• [sdiy] Tapped Pots?   Tom Bugs
• [sdiy] Tapped Pots?   thx1138
• [sdiy] Music Easel slider analysis, in detail   Aaron Lanterman
• [sdiy] CD4067 24-pin DIP pin spacing   David G. Dixon
• [sdiy] Thank you for all the hardware advice   Tim Parkhurst
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   Tim Parkhurst
• [sdiy] Buchla 144 dual square wave oscillator   Aaron Lanterman
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Magnus Danielson
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Tim Parkhurst
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Stewart Pye
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Mark Rivera
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Jim Palmer
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Alex Iles
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Donald Tillman
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   Jay Schwichtenberg
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Magnus Danielson
• [sdiy] Buchla 144 dual square wave oscillator   Donald Tillman
• [sdiy] On shielded cable (or not) for audio   Aaron Lanterman
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Jason Proctor
• [sdiy] Thank you for all the hardware advice   Tom Arnold
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Tom Arnold
• [sdiy] On shielded cable (or not) for audio   Scott
• [sdiy] On shielded cable (or not) for audio   Mike Gorman
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Graham Atkins
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Stewart Pye
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Andreas Wetterberg
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Colin f
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Graham Atkins
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Jason Proctor
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   David G. Dixon
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   David G. Dixon
• [sdiy] CD4067 24-pin DIP pin spacing   Graham Atkins
• [sdiy] CD4067 24-pin DIP pin spacing   Graham Atkins
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Bob Devries
• [sdiy] CD4067 24-pin DIP pin spacing   Eric Brombaugh
• [sdiy] On shielded cable (or not) for audio   Scott Nordlund
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Jason Proctor
• [sdiy] On shielded cable (or not) for audio   Ian Fritz
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Mark Olson
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Tom Farrand
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Graham Atkins
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   David G. Dixon
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Seb Francis
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Tom Wiltshire
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Tim Daugard
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Scott
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Samppa Tolvanen
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Tom Wiltshire
• [sdiy] CD4067 24-pin DIP pin spacing   Tim Stinchcombe
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Scott
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Neil Johnson
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   thx1138
• [sdiy] Buchla 144 dual square wave oscillator   Donald Tillman
• [sdiy] Buchla 144 dual square wave oscillator   Dennis Verschoor
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   David Ingebretsen
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   Andre Majorel
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   thx1138
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Donald Tillman
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Scott Gravenhorst
• [sdiy] Buchla 144 dual square wave oscillator   Scott Gravenhorst
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Magnus Danielson
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Tom Wiltshire
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Dave Kendall
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   m.bareille at free.fr
• [sdiy] DIY book?   Ian Fritz
• [sdiy] DIY book?   Tim Parkhurst
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   David G. Dixon
• [sdiy] DIY book?   jvastine
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Tim Parkhurst
• [sdiy] DIY book?   Tim Parkhurst
• [sdiy] Front panel rough drafts   Aaron Lanterman
• [sdiy] FPE prices = HOLY SMOKES   Aaron Lanterman
• [sdiy] FPE prices = HOLY SMOKES   Dave Leith
• [sdiy] FPE prices = HOLY SMOKES   Tom Arnold
• [sdiy] DIY book?   aerogramma
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Dave Manley
• [sdiy] FPE prices = HOLY SMOKES   Olav Martin Kvern
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   Neil Johnson
• [sdiy] Long "Doepfer" cables   Derek Holzer
• RE: [sdiy] FPE prices = HOLY SMOKES   rdrake
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   David G. Dixon
• [sdiy] DIY book? Tesla   Vesa Lahteenmaki
• [sdiy] FPE prices = HOLY SMOKES   Adam Schabtach
• [sdiy] FPE prices = HOLY SMOKES   Mark Rivera
• [sdiy] Thank you for all the hardware advice   Adam Schabtach
• [sdiy] (very OT?) Analog vs. Analogue - opinions needed   Justin Owen
• [sdiy] DIY book?   David Panseri
• [sdiy] Dual Log/Linear Irwin-Gallo VCA   Neil Johnson
• [sdiy] On shielded cable (or not) for audio   Antti Huovilainen
• [sdiy] DIY book?   Ian Fritz
• [sdiy] On shielded cable (or not) for audio   Samppa Tolvanen
• [sdiy] (slightly OT?) Analog vs. Analogue - opinions needed   Andre Majorel
• [sdiy] WTB... MKS-7 white / black rack ears   Andre Majorel
• [sdiy] Choosing a DAC   Stewart Pye
• [sdiy] Choosing a DAC   thx1138
• [sdiy] Choosing a DAC   David Brown
• [sdiy] tinning solution toxicity?   Dave Leith
• [sdiy] tinning solution toxicity?   David G. Dixon
• [sdiy] Choosing a DAC   stew
• [sdiy] Choosing a DAC   John Loffink
• [sdiy] Where to get *new* keyboard assemblies?   Karl Ekdahl
• [sdiy] Multiplier vs VCA   Aaron Lanterman
• [sdiy] On shielded cable (or not) for audio   Scott Nordlund
• [sdiy] Choosing a DAC   Olav Martin Kvern
• [sdiy] DIY book?   Aaron Lanterman
• [sdiy] Tolerances for front panels   Aaron Lanterman
• [sdiy] Multiplier vs VCA   Mike Gorman
• [sdiy] Choosing a DAC   Dave Manley
• [sdiy] 2164-based multiplier working   David G. Dixon
• [sdiy] Choosing a DAC   Olav Martin Kvern
• [sdiy] Choosing a DAC   Florian Teply
• [sdiy] Choosing a DAC   Stewart Pye
• [sdiy] Choosing a DAC   Tom Wiltshire
• [sdiy] Italian GRP synths   Neil Johnson
• [sdiy] Choosing a DAC   Stewart Pye
• [sdiy] Choosing a DAC   Csaba Zvekan
• [sdiy] Choosing a DAC   Louis van Dompselaar
• [sdiy] On shielded cable (or not) for audio   Ian Fritz
• [sdiy] On shielded cable (or not) for audio   Antti Huovilainen
• [sdiy] Choosing a DAC   Tom Wiltshire
• [sdiy] Choosing a DAC   Ingo Debus
• [sdiy] Choosing a DAC   David Anderson
• [sdiy] Choosing a DAC   Tom Wiltshire
• [sdiy] Choosing a DAC   George Hearn
• [sdiy] Choosing a DAC   Ingo Debus
• [sdiy] Connecting two boards   Tom Arnold
• [sdiy] Italian GRP synths   Neil Johnson
• [sdiy] Choosing a DAC   Stewart Pye
• [sdiy] Connecting two boards   Byron G. Jacquot
• [sdiy] Connecting two boards   Tom Arnold
• [sdiy] tips for wooden frames/cases (monome clone)   Danjel van Tijn
• [sdiy] Connecting two boards   Eric Brombaugh
• [sdiy] Connecting two boards   Eric Brombaugh
• [sdiy] Re: tips for wooden frames/cases (monome clone)   Danjel van Tijn
• [sdiy] Connecting two boards   Tom Arnold
• [sdiy] Hired gun needed for SMT layout and production   Andreas Wetterberg
• [sdiy] tips for wooden frames/cases (monome clone)   Dave Manley
• [sdiy] Tolerances for front panels   Kevin Haywood
• [sdiy] Serge hole pattern   Aaron Lanterman
• [sdiy] Tolerances for front panels   David Ingebretsen
• [sdiy] Weird Serge front panel overlap material   Aaron Lanterman
• [sdiy] "scrapbooking" die cut machines   Aaron Lanterman
• [sdiy] Weird Serge front panel overlap material   Louis van Dompselaar
• [sdiy] Weird Serge front panel overlap material   mark verbos
• [sdiy] Weird Serge front panel overlap material   Chris Muir
• [sdiy] "scrapbooking" die cut machines   David Panseri
• [sdiy] Need advice some diy advice as a beginner   Benjamin
• [sdiy] Need advice some diy advice as a beginner   Matthias.Herrmann at jeppesen.com
• [sdiy] "scrapbooking" die cut machines   Ben Lincoln
• [sdiy] Touchpad X-Y Pad   Dragomir Mawka
• [sdiy] "scrapbooking" die cut machines   David Panseri
• [sdiy] "scrapbooking" die cut machines   Julian
• [sdiy] Another couple of panels hot off the machine.   Julian
• [sdiy] "scrapbooking" die cut machines   Tom Wiltshire
• [sdiy] tips for wooden frames/cases (monome clone)   Danjel van Tijn
• [sdiy] "scrapbooking" die cut machines   Jerry Gray-Eskue
• [sdiy] "scrapbooking" die cut machines   Dave Manley
• [sdiy] Weird Serge front panel overlap material   David G. Dixon
• [sdiy] For breadboard lovers...   Seb Francis
• [sdiy] For breadboard lovers...   Aaron Lanterman
• [sdiy] broken mc-202   Danjel van Tijn
• [sdiy] MC-202 clock/sync probs (re: broken mc-202)   Doug Terrebonne
• [sdiy] Re: [AH] broken mc-202   Pete
• [sdiy] For breadboard lovers...   David G. Dixon
• [sdiy] MC-202 clock/sync probs (re: broken mc-202)   Jason Proctor
• [sdiy] For breadboard lovers...   Danjel van Tijn
• [sdiy] For breadboard lovers...   David G. Dixon
• [sdiy] For breadboard lovers...   Robin Whittle
• [sdiy] For breadboard lovers...   Jerry Gray-Eskue
• [sdiy] Choosing a DAC   Cornutt, David K
• [sdiy] tips for wooden frames/cases (monome clone)   Mike Beauchamp
• [sdiy] Re: [AH] broken mc-202   Danjel van Tijn
• [sdiy] Re: [AH] broken mc-202   Sean Ellis
• [sdiy] For breadboard lovers...   Ullrich Peter
• Re: [sdiy] "scrapbooking" die cut machines   Justin Owen
• [sdiy] Another couple of panels hot off the machine.   Justin Owen
• [sdiy] Re: [AH] broken mc-202   paul.maddox.mail-list at synth.net
• [sdiy] For breadboard lovers...   Jason Tribbeck
• [sdiy] Another couple of panels hot off the machine.   Julian
• [sdiy] For breadboard lovers...   Jerry Gray-Eskue
• [sdiy] For breadboard lovers...   Ullrich Peter
• [sdiy] For breadboard lovers...   Jason Tribbeck
• [sdiy] For breadboard lovers...   Jason Tribbeck
• [sdiy] For breadboard lovers...   Ullrich Peter
• [sdiy] For breadboard lovers...   Jerry Gray-Eskue
• [sdiy] For breadboard lovers...   Scott Gravenhorst
• [sdiy] For breadboard lovers...   Jason Tribbeck
• [sdiy] making pcbs   Dan Snazelle
• [sdiy] Need advice some diy advice as a beginner   benjamin
• [sdiy] Buchla schematics in general   Grant Richter
• [sdiy] Buchla schematics in general   Magnus Danielson
• [sdiy] Need advice some diy advice as a beginner   David G. Dixon
• [sdiy] If Tesla built a synth   Jerry Gray-Eskue
• [sdiy] Need advice some diy advice as a beginner   Julian
• [sdiy] Re: [AH] broken mc-202   Danjel van Tijn
• [sdiy] anyone have MC-202 sliders for sale?   Danjel van Tijn
• [sdiy] SDIY list in dayli digest form   Csaba Zvekan
• [sdiy] Need advice some diy advice as a beginner   mailing gigaspeeds
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers... )   Tom Arnold
• [sdiy] Need advice some diy advice as a beginner   David G. Dixon
• [sdiy] Need advice some diy advice as a beginner   Tom Arnold
• [sdiy] anyone have MC-202 sliders for sale?   John Henson
• [sdiy] TR-909 reset pin on PSU   epk
• [sdiy] Need advice some diy advice as a beginner   Paul Perry
• [sdiy] TR-909 reset pin on PSU   Colin f
• [sdiy] TR-909 reset pin on PSU   epk
• [sdiy] anyone have MC-202 sliders for sale?   Danjel van Tijn
• [sdiy] tips for wooden frames/cases (monome clone)   Danjel van Tijn
• [sdiy] Need advice some diy advice as a beginner   David G. Dixon
• [sdiy] TR-909 reset pin on PSU   Tony K
• [sdiy] Anyone know how to open a Virus Indigo?   Mark Rivera
• [sdiy] parts bins   Danjel van Tijn
• [sdiy] parts bins   David G. Dixon
• [sdiy] parts bins   Paul Perry
• [sdiy] TR-909 reset pin on PSU   epk
• [sdiy] parts bins   Andre Majorel
• [sdiy] parts bins   paul.maddox.mail-list at synth.net
• [sdiy] parts bins   benjamin
• [sdiy] Need advice some diy advice as a beginner   Justin Owen
• [sdiy] Need advice some diy advice as a beginner   Justin Owen
• [sdiy] Need advice some diy advice as a beginner   aerogramma
• [sdiy] Need advice some diy advice as a beginner   aerogramma
• [sdiy] Need advice some diy advice as a beginner   Louis van Dompselaar
• [sdiy] Need advice some diy advice as a beginner   aerogramma
• [sdiy] Need advice some diy advice as a beginner   Derek Holzer
• [sdiy] Need advice some diy advice as a beginner   Derek Holzer
• [sdiy] Need advice some diy advice as a beginner   Louis van Dompselaar
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers... )   Jason Tribbeck
• [sdiy] Need advice some diy advice as a beginner   Derek Holzer
• [sdiy] Need advice some diy advice as a beginner   benjamin
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers... )   Seb Francis
• [sdiy] parts bins   Tom Wiltshire
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers...)   Forbes, William ALGLSG-LXES
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers...)   Jason Tribbeck
• [sdiy] anyone knows about elektrotanya.podzone.net ?   Florian Anwander
• [sdiy] anyone knows about elektrotanya.podzone.net ?   Gergo Palatinszky
• [sdiy] anyone knows about elektrotanya.podzone.net ?   Loscha
• [sdiy] parts bins   Karl Ekdahl
• [sdiy] parts bins   Lists
• SV: [sdiy] parts bins   John Alex Hvidlykke
• [sdiy] LM741 substitute   aerogramma
• [sdiy] parts bins   Jerry Gray-Eskue
• [sdiy] LM741 substitute   Tom Bugs
• [sdiy] LM741 substitute   Tony Rolando
• [sdiy] LM741 substitute   Tom Wiltshire
• [sdiy] LM741 substitute   Tony Rolando
• [sdiy] LM741 substitute   Samppa Tolvanen
• [sdiy] LM741 substitute   Tony Rolando
• [sdiy] MIDI guitar   Dragomir Mawka
• [sdiy] Fine pitch etching (was: For breadboard lovers...)   Andy Eakin
• [sdiy] LM741 substitute   Magnus Danielson
• [sdiy] parts bins   Andre Majorel
• [sdiy] LM741 substitute   Aaron Lanterman
• [sdiy] MIDI guitar   Tom Wiltshire
• [sdiy] parts bins   Tim Parkhurst
• [sdiy] Fine pitch etching (was: For breadboard lovers...)   Jerry Gray-Eskue
• [sdiy] MIDI guitar   Veronica Merryfield
• [sdiy] Google Honors Tesla   John Mahoney
• [sdiy] Fine pitch etching (was: For breadboard lovers...)   Ben Lincoln
• [sdiy] LM741 substitute   Kyle Stephens
• [sdiy] MIDI guitar   Jerry Gray-Eskue
• [sdiy] Google Honors Tesla   Aaron Lanterman
• [sdiy] LM741 substitute   Chris Muir
• [sdiy] first-of-n or last-of-n circuits?   Electronic Battle
• [sdiy] LM741 substitute   dragons
• [sdiy] Google Honors Tesla   Eric Brombaugh
• [sdiy] Fine pitch etching (was: For breadboard lovers...)   Adam Schabtach
• [sdiy] MIDI guitar   Antti Huovilainen
• [sdiy] LM741 substitute   David G. Dixon
• [sdiy] MIDI guitar   Florian Anwander
• [sdiy] Fine pitch etching (was: For breadboard lovers...)   David G. Dixon
• [sdiy] LM741 substitute   David G. Dixon
• [sdiy] parts bins   Seb Francis
• [sdiy] parts bins   David G. Dixon
• [sdiy] parts bins   Seb Francis
• [sdiy] MIDI guitar   Chris Muir
• [sdiy] LM741 substitute   David G. Dixon
• [sdiy] LM741 substitute   Magnus Danielson
• [sdiy] Google Honors Tesla   Tim Parkhurst
• [sdiy] Fine pitch etching (was: For breadboard lovers...)   David G. Dixon
• [sdiy] parts bins   Chris Muir
• [sdiy] LM741 substitute   Antti Huovilainen
• [sdiy] LM741 substitute   Chris Muir
• [sdiy] LM741 substitute   aerogramma
• [sdiy] Google Honors Tesla   David Panseri
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers... )   Tom Arnold
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers... )   Tom Arnold
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers...)   Tom Arnold
• [sdiy] LM741 substitute   David G. Dixon
• [sdiy] LM741 substitute   David G. Dixon
• [sdiy] Google Honors Tesla   Cynthia Webster
• [sdiy] MIDI guitar   Tom Wiltshire
• [sdiy] LM741 substitute   Tom Wiltshire
• [sdiy] LM741 substitute   Antti Huovilainen
• [sdiy] LM741 substitute   Samppa Tolvanen
• [sdiy] Preamp circuits   David G. Dixon
• [sdiy] Preamp circuits   Jason Proctor
• [sdiy] MIDI guitar   Veronica Merryfield
• [sdiy] MIDI guitar   Veronica Merryfield
• [sdiy] MIDI guitar   Veronica Merryfield
• [sdiy] Google Honors Tesla   Bradley Slavik
• [sdiy] envelope follower circuit (was Preamp circuits)   John Mahoney
• [sdiy] LM741 substitute   JH.
• [sdiy] LM741 substitute   Antti Huovilainen
• [sdiy] Re: envelope follower circuit (was Preamp circuits)   Jason Proctor
• [sdiy] OT: help finding free/trial disk repair software   Dan Snazelle
• [sdiy] LM741 substitute   Magnus Danielson
• [sdiy] OT: help finding free/trial disk repair software   aerogramma
• [sdiy] Preamp circuits   Magnus Danielson
• [sdiy] OT: help finding free/trial disk repair software   Jason Proctor
• [sdiy] meters from farnell   Danjel van Tijn
• [sdiy] OT: help finding free/trial disk repair software   BrightBoy
• [sdiy] Preamp circuits   David G. Dixon
• [sdiy] Preamp circuits   David G. Dixon
• [sdiy] OT: help finding free/trial disk repair software   Dan Snazelle
• [sdiy] OT: help finding free/trial disk repair software   Jason Proctor
• [sdiy] meters from farnell   Julian
• [sdiy] meters from farnell   Danjel van Tijn
• [sdiy] OT: help finding free/trial disk repair software   Dan Snazelle
• [sdiy] OT: help finding free/trial disk repair software   Barry Klein
• [sdiy] Preamp circuits   Magnus Danielson
• [sdiy] Re: MIDI guitar   Dragomir Mawka
• [sdiy] Preamp circuits   aerogramma
• [sdiy] tl ic question   mailing gigaspeeds
• [sdiy] tl ic question   aerogramma
• [sdiy] LM741 substitute   Oakley Sound
• [sdiy] tl ic question   Dave Manley
• [sdiy] Re: MIDI guitar   Florian Anwander
• [sdiy] tl ic question   Derek Holzer
• [sdiy] tl ic question   George Hearn
• SV: [sdiy] tl ic question   John Alex Hvidlykke
• [sdiy] Need advice some diy advice as a beginner   Florian Teply
• [sdiy] tl ic question   Paul Schreiber
• [sdiy] LM741 substitute   Tim Daugard
• [sdiy] LM741 substitute   David G. Dixon
• [sdiy] tl ic question   David Ingebretsen
• [sdiy] Need advice some diy advice as a beginner   mark verbos
• [sdiy] tl ic question   Tim Parkhurst
• [sdiy] Need advice some diy advice as a beginner   mailing gigaspeeds
• [sdiy] tl ic question   mailing gigaspeeds
• [sdiy] tl ic question   Paul Schreiber
• [sdiy] Re: MIDI guitar   HARRY BISSELL
• [sdiy] Re: MIDI guitar   Ullrich Peter
• [sdiy] LM741 substitute   Samppa Tolvanen
• [sdiy] tl ic question   Samppa Tolvanen
• [sdiy] IC parts binning   Paul Schreiber
• [sdiy] Re: IC parts binning   Samppa Tolvanen
• [sdiy] Re: IC parts binning   Tony Rolando
• [sdiy] Re: IC parts binning   Dave Manley
• [sdiy] Re: IC parts binning   Robin Whittle
• [sdiy] Re: IC parts binning   Dave Manley
• [sdiy] More about IC design   Paul Schreiber
• [sdiy] More about IC design   Dave Manley
• [sdiy] Messing with chips with light   Robin Whittle
• [sdiy] Messing with chips with light   Aaron Lanterman
• FW: [sdiy] More about IC design   Tonnie Wiegman
• [sdiy] Anybody got diagram/part SAA1005?   Bob Weigel
• [sdiy] More about IC design   Florian Teply
• [sdiy] LM741 substitute   Magnus Danielson
• [sdiy] LM741 substitute   Magnus Danielson
• [sdiy] More about IC design   Greg James
• [sdiy] Messing with chips with light   Samppa Tolvanen
• [sdiy] Anybody got diagram/part SAA1005?   Ullrich Peter
• [sdiy] Tini-jax patch cables   Aaron Lanterman
• [sdiy] to banana or not to banana   Aaron Lanterman
• [sdiy] My new webpage on making Buchla compatible stuff   Aaron Lanterman
• [sdiy] divider chips and Farfisa Professional   dragons
• [sdiy] My new webpage on making Buchla compatible stuff   Benjamin
• [sdiy] Photo PCB with projector? ( was : For breadboard lovers...)   Jason Tribbeck
• [sdiy] Tini-jax patch cables   Chris Muir
• [sdiy] My new webpage on making Buchla compatible stuff   Chris Muir
• [sdiy] Tini-jax patch cables   David Ingebretsen
• [sdiy] Tini-jax patch cables   Chris Muir
• [sdiy] to banana or not to banana   Chris Muir
• [sdiy] Synth DIY UK weekend details   Neil Johnson
• [sdiy] Tini-jax patch cables   David Ingebretsen
• [sdiy] 8x8 switching matrix   Derek Holzer
• [sdiy] Re: 8x8 switching matrix   Derek Holzer
• [sdiy] 8x8 switching matrix   Rainer Buchty
• [sdiy] 8x8 switching matrix   Derek Holzer
• [sdiy] Re: 8x8 switching matrix   Samppa Tolvanen
• [sdiy] 8x8 switching matrix   Ullrich Peter
• [sdiy] more showing off...   Julian
• [sdiy] more showing off...   Jason Tribbeck
• [sdiy] MIDI cointroller (guitar type)   Jean-Pierre Desrochers
• [sdiy] more showing off...   Tom Wiltshire
• [sdiy] Tini-jax patch cables   flightofharmony
• [sdiy] Tini-jax patch cables   David Ingebretsen
• [sdiy] Tini-jax patch cables   David Ingebretsen
• [sdiy] MIDI cointroller (guitar type)   Andre Majorel
• [sdiy] Flash from the past: Photon Guitar Midi converter   Vesa Lahteenmaki
• [sdiy] Flash from the past: Photon Guitar Midi converter   Vesa Lahteenmaki
• [sdiy] more showing off...   Tim Parkhurst
• [sdiy] more showing off...   Julian
• [sdiy] more showing off...   David G. Dixon
• [sdiy] more showing off...   Tim Parkhurst
• [sdiy] more showing off...   Julian
• [sdiy] Kurzweil K2000 Query continued   DTK
• [sdiy] Kurzweil K2000 Query continued   Bob Weigel
• [sdiy] Photon Guitar Midi converter and FFT   HARRY BISSELL
• [sdiy] lowery magic genie 98 organ   Cory Scott
• [sdiy] Kurzweil K2000 Query continued   John Loffink
• [sdiy] Kurzweil K2000 Query continued   Doug Terrebonne
• [sdiy] Kurzweil K2000 Query continued   paul brooks
• [sdiy] Kurzweil K2000 Query continued   DTK
• [sdiy] 8x8 switching matrix   Derek Holzer
• [sdiy] Kurzweil K2000 Query continued   Dave Kendall
• [sdiy] Multicom Toggle Switches   Matthias.Herrmann at jeppesen.com
• [sdiy] Synclavier buttons   Tom Wiltshire
• [sdiy] Photon Guitar Midi converter and FFT   Steve Ridley
• [sdiy] Auto Center waveforms   Jerry Gray-Eskue
• [sdiy] Auto Center waveforms   Eric Brombaugh
• [sdiy] 808 drums...how they work?   Dan Snazelle
• [sdiy] Auto Center waveforms   David Anderson
• [sdiy] Auto Center waveforms   David Anderson
• [sdiy] Auto Center waveforms   Forbes, William ALGLSG-LXES
• [sdiy] Synclavier buttons   Paul Schreiber
• [sdiy] Auto Center waveforms   Forbes, William ALGLSG-LXES
• [sdiy] 808 drums...how they work?   Florian Anwander
• [sdiy] Synclavier buttons   Dave Manley
• [sdiy] Synclavier buttons   Eric Brombaugh
• [sdiy] Auto Center waveforms   Jerry Gray-Eskue
• [sdiy] Auto Center waveforms   Tom Wiltshire
• [sdiy] Auto Center waveforms   Jerry Gray-Eskue
• [sdiy] differential subtractor vs summer with an inverted input   David G. Dixon
• [sdiy] Auto Center waveforms   Eric Brombaugh
• [sdiy] Auto Center waveforms   Tim Parkhurst
• [sdiy] Auto Center waveforms   Jerry Gray-Eskue
• [sdiy] Auto Center waveforms   Jerry Gray-Eskue
• [sdiy] Auto Center waveforms   Kyle Stephens
• [sdiy] Auto Center waveforms   Jerry Gray-Eskue
• [sdiy] 808 drums...how they work?   Stewart Pye
• [sdiy] differential subtractor vs summer with an inverted input   Neil Johnson
• [sdiy] 808 drums...how they work?   Pete
• [sdiy] Auto Center waveforms   Neil Johnson
• [sdiy] differential subtractor vs summer with an inverted input   David G. Dixon
• [sdiy] Comparitor on Buchla 258   Aaron Lanterman
• [sdiy] MOTM E340 Cloud Generator demos   Paul Schreiber
• [sdiy] Messing with chips with light   Pavel Kirkovsky
• [sdiy] If Tesla built a synth   Pavel Kirkovsky
• [sdiy] Messing with chips with light   Samppa Tolvanen
• [sdiy] 808 drums...how they work?   Benjamin
• [sdiy] 808 drums...how they work?   Tom Wiltshire
• [sdiy] Messing with chips with light   Scott Nordlund
• [sdiy] MOTM E340 Cloud Generator demos   Michael Zacherl.
• [sdiy] 808 drums...how they work?   Dan Snazelle
• [sdiy] Synth DIY UK weekend details   Michael Zacherl.
• [sdiy] Comparitor on Buchla 258   Donald Tillman
• [sdiy] Comparitor on Buchla 258   Tony Rolando
• [sdiy] Weird Serge front panel overlap material   Andre Majorel
• [sdiy] Weird Serge front panel overlap material   Ben Barwise
• [sdiy] Synth DIY UK weekend details   Mike Gorman
• [sdiy] Synth DIY UK weekend details   Colin f
• [sdiy] Synth DIY UK weekend details   Michael Zacherl.
• [sdiy] Synth DIY UK weekend details   Jason Proctor
• [sdiy] Weird Serge front panel overlap material   David G. Dixon
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] Synth DIY UK weekend details   Tim Parkhurst
• [sdiy] Synth DIY UK weekend details   Scott Gravenhorst
• [sdiy] OT - plastic bolt covers and washers   Dave Manley
• [sdiy] DG403 electronic switch -- single power supply ?   rdrake
• [sdiy] DG403 electronic switch -- single power supply ?   Neil Johnson
• [sdiy] Synth DIY UK weekend details   Rainer Buchty
• [sdiy] 8x8 switching matrix   Daniel Kruszyna
• [sdiy] Synth DIY UK weekend details   Mark
• [sdiy] 8x8 switching matrix   Dave Manley
• [sdiy] 8x8 switching matrix   Samppa Tolvanen
• [sdiy] Knobs for Freeman String machine?   Bob Weigel
• [sdiy] 8x8 switching matrix   Daniel Kruszyna
• [sdiy] Another "guitar" controller :-)   Ullrich Peter
• [sdiy] 100k pot with switch questions   Dan Snazelle
• [sdiy] 100k pot with switch questions   Tom Bugs
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] Son Of Storm Tide Flanger - early preview   JH.
• [sdiy] Another "guitar" controller :-)   Donald Tillman
• [sdiy] Synth DIY UK weekend details   The Doctor
• [sdiy] Son Of Storm Tide Flanger - early preview   Dave Manley
• [sdiy] Son Of Storm Tide Flanger - early preview   JH.
• [sdiy] Son Of Storm Tide Flanger - early preview   mailing gigaspeeds
• [sdiy] Synth DIY UK weekend details   Jason Proctor
• [sdiy] single 9 volt battery white noise source   David G. Dixon
• [sdiy] Synth DIY UK weekend details   David G. Dixon
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] CMOS chip questions   Scott Nordlund
• [sdiy] apology to Roy Tellason...   Bob Weigel
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] single 9 volt battery white noise source   Oren Leavitt
• [sdiy] single 9 volt battery white noise source   David G. Dixon
• [sdiy] Undeliverable mail message   David G. Dixon
• [sdiy] single 9 volt battery white noise source   Paul Perry
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] Undeliverable mail message   Ian Smith
• [sdiy] Crumar performer sustain mod   Bob Weigel
• [sdiy] single 9 volt battery white noise source   aerogramma
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] Crumar performer sustain mod   JH.
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] My Frequency Shifter on youtube!   JH.
• [sdiy] CMOS chip questions   Florian Teply
• [sdiy] weird PNP/NPN expo questions   Dan Snazelle
• [sdiy] CMOS chip questions   Dan Snazelle
• [sdiy] CMOS chip questions   Scott Nordlund
• [sdiy] CMOS chip questions   Dan Snazelle
• [sdiy] CMOS chip questions   Scott Gravenhorst
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] weird PNP/NPN expo questions   Ian Fritz
• [sdiy] weird PNP/NPN expo questions   David G. Dixon
• [sdiy] weird PNP/NPN expo questions   Ian Fritz
• [sdiy] CMOS chip questions   Scott Gravenhorst
• [sdiy] weird PNP/NPN expo questions   Dan Snazelle
• [sdiy] weird PNP/NPN expo questions   David G. Dixon
• [sdiy] Son Of Storm Tide Flanger - early preview   Andre Majorel
• [sdiy] single 9 volt battery white noise source   HOSHUYAMA
• [sdiy] single 9 volt battery white noise source   Samppa Tolvanen
• [sdiy] CMOS chip questions   Samppa Tolvanen
• [sdiy] CMOS chip questions   Tom Wiltshire
• [sdiy] Metcal sp200 tips ?   jovius
• [sdiy] CMOS chip questions   Dan Snazelle
• [sdiy] CMOS chip questions   Samppa Tolvanen
• [sdiy] CMOS chip questions   Graham Atkins
• [sdiy] single 9 volt battery white noise source   Dave Leith
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] CMOS chip questions   Dave Manley
• [sdiy] New digital synthesis projects under way   Graham Atkins
• [sdiy] CMOS chip questions   Dave Kendall
• [sdiy] Metcal sp200 tips ?   Joe Grisso
• [sdiy] New digital synthesis projects under way   Eric Brombaugh
• [sdiy] Great weekend in Cambridge   Keith Winstanley
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] CMOS chip questions   Scott Gravenhorst
• [sdiy] CMOS chip questions   Scott Nordlund
• [sdiy] CMOS chip questions   Tom Wiltshire
• [sdiy] CMOS chip questions   Scott Gravenhorst
• [sdiy] CMOS chip questions   George Hearn
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] CMOS chip questions   Samppa Tolvanen
• [sdiy] CMOS chip questions   Antti Huovilainen
• [sdiy] CMOS chip questions   Dan Snazelle
• [sdiy] CMOS chip questions   Dan Snazelle
• [sdiy] CMOS chip questions   Scott Nordlund
• [sdiy] CMOS chip questions   Florian Teply
• [sdiy] CMOS chip questions   Samppa Tolvanen
• [sdiy] 8x8 switching matrix   Derek Holzer
• [sdiy] The Ultimate in DIY sound synthesis   Jerry Gray-Eskue
• [sdiy] The Ultimate in DIY sound synthesis   Tom Farrand
• [sdiy] Right Angle Male Headers   Jerry Gray-Eskue
• [sdiy] CMOS chip questions   Dave Manley
• [sdiy] Right Angle Male Headers   Samppa Tolvanen
• [sdiy] Re: Is Prophet 5 v2 moddable to 10 voices?   cheater cheater
• [sdiy] CMOS chip questions   Jason Proctor
• [sdiy] Great weekend in Cambridge   Needham, Alan
• [sdiy] CMOS chip questions   Samppa Tolvanen
• [sdiy] Some photos and videos from Synth DIY UK 2009   Finlay Shakespeare
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] CMOS chip questions   David G. Dixon
• [sdiy] Great weekend in Cambridge   David G. Dixon
• [sdiy] simple 8k lowpass for ADC?   Dan Snazelle
• [sdiy] Right Angle Male Headers   Tom Arnold
• [sdiy] MOTM E340 Cloud Generator panel mockup   Paul Schreiber
• [sdiy] CMOS chip questions   Dave Manley
• [sdiy] simple 8k lowpass for ADC?   Tom Wiltshire
• [sdiy] simple 8k lowpass for ADC?   Tom Wiltshire
• [sdiy] Outage of my webpages   Magnus Danielson
• [sdiy] simple 8k lowpass for ADC?   Csaba Zvekan
• [sdiy] Great weekend in Cambridge   Colin f
• [sdiy] Great weekend in Cambridge   David G. Dixon
• [sdiy] simple 8k lowpass for ADC?   Dan Snazelle
• [sdiy] Great weekend in Cambridge   Tom Arnold
• [sdiy] Aaron's take on the Buchla 258 (rough draft)   Aaron Lanterman
• [sdiy] Aaron's take on the Buchla 258 (rough draft)   David G. Dixon
• [sdiy] Aaron's take on the Buchla 258 (rough draft)   Aaron Lanterman
• [sdiy] Aaron's take on the Buchla 258 (rough draft)   mark verbos
• [sdiy] Great weekend in Cambridge   Ullrich Peter
• [sdiy] Great weekend in Cambridge   Paul Perry
• [sdiy] Great weekend in Cambridge   Neil Johnson
• [sdiy] Great weekend in Cambridge   Tony K
• [sdiy] Great weekend in Cambridge   krisp1
• [sdiy] Great weekend in Cambridge   paul.maddox.mail-list at synth.net
• [sdiy] SSM2164 Filter Cells   Jay Schwichtenberg
• [sdiy] Great weekend in Cambridge   Paul Maddox
• [sdiy] Great weekend in Cambridge   Colin f
• [sdiy] Great weekend in Cambridge   Mike Gorman
• [sdiy] S2555 S2556 anyone? (TOS equiv. to Lowry 911-018813-1 /-002)   Bob Weigel
• [sdiy] SSM2164 Filter Cells   Scott Nordlund
• [sdiy] SSM2164 Filter Cells   Aaron Lanterman
• [sdiy] SSM2164 Filter Cells   Aaron Lanterman
• [sdiy] SSM2164 Filter Cells   David G. Dixon
• [sdiy] SSM2164 Filter Cells   Aaron Lanterman
• [sdiy] SSM2164 Filter Cells   HOSHUYAMA
• [sdiy] SSM2164 Filter Cells   David G. Dixon
• [sdiy] SSM2164 Filter Cells   David G. Dixon
• [sdiy] SSM2164 Filter Cells   Neil Johnson
• [sdiy] Aaron's take on the Buchla 258 (rough draft)   Magnus Danielson
• [sdiy] SSM2164 Filter Cells   Neil Johnson
• [sdiy] SSM2164 Filter Cells   Neil Johnson
• [sdiy] SSM2164 Filter Cells   Neil Johnson
• [sdiy] SSM2164 Filter Cells   Neil Johnson
• [sdiy] MOTM E340 Cloud Generator panel mockup   Magnus Danielson
• [sdiy] SSM2164 Filter Cells   HOSHUYAMA
• [sdiy] Bode Ringmodulator 6401/6402 schematic   Dennis Verschoor
• [sdiy] SSM2164 Filter Cells   Jay Schwichtenberg
• [sdiy] SSM2164 Filter Cells   Neil Johnson
• [sdiy] SSM2164 Filter Cells   David G. Dixon
• [sdiy] SSM2164 Filter Cells   Scott Nordlund
• [sdiy] Great weekend in Cambridge   Keith Winstanley
• [sdiy] "Curtis" filter in Prophet 8   David Ingebretsen
• [sdiy] "Curtis" filter in Prophet 8   Paul Schreiber
• [sdiy] "Curtis" filter in Prophet 8   Antti Huovilainen
• [sdiy] "Curtis" filter in Prophet 8   JJB
• [sdiy] "Curtis" filter in Prophet 8   Paul Schreiber
• [sdiy] "Curtis" filter in Prophet 8   Veronica Merryfield
• [sdiy] "Curtis" filter in Prophet 8   Antti Huovilainen
• [sdiy] "Curtis" filter in Prophet 8   JJB
• [sdiy] Semi-OT: Moog Etherwave PSU pinout?   Colin Hinz
• [sdiy] "Curtis" filter in Prophet 8   David Ingebretsen
• [sdiy] "Curtis" filter in Prophet 8   Paul Schreiber
• [sdiy] "Curtis" filter in Prophet 8   David Ingebretsen
• [sdiy] Dimensions of 19" racks and eurorack   Andre Majorel
• [sdiy] "Curtis" filter in Prophet 8   Graham Atkins
• obsolescence (was Re: [sdiy] "Curtis" filter in Prophet 8)   Tom Wiltshire
• [sdiy] SSM2164 panning curve   Derek Holzer
• [sdiy] "Curtis" filter in Prophet 8   Doug Terrebonne
• [sdiy] Semi-OT: Moog Etherwave PSU pinout?   Ingo Debus
• [sdiy] SSM2164 panning curve   Tom Wiltshire
• [sdiy] SSM2164 panning curve   Derek Holzer
• [sdiy] "Curtis" filter in Prophet 8   Paul Schreiber
• [sdiy] SSM2164 panning curve   Jerry Gray-Eskue
• [sdiy] SSM2164 Filter Cells   HOSHUYAMA
• obsolescence (was Re: [sdiy] "Curtis" filter in Prophet 8)   Rainer Buchty
• [sdiy] Bode Ringmodulator 6401/6402 schematic   Jean-Pierre Desrochers
• [sdiy] small ,higher than 8 input multiplexers?   Dan Snazelle
• [sdiy] small ,higher than 8 input multiplexers?   David G. Dixon
• [sdiy] small ,higher than 8 input multiplexers?   Dave Manley
• [sdiy] small ,higher than 8 input multiplexers?   Ingo Debus
• [sdiy] small ,higher than 8 input multiplexers?   Jason Proctor
• [sdiy] small ,higher than 8 input multiplexers?   Tom Wiltshire
• [sdiy] SSM2164 panning curve   Tom Wiltshire
• [sdiy] Undeliverable mail   Tom Wiltshire
• [sdiy] "Curtis" filter in Prophet 8   Tom Arnold
• [sdiy] SSM2164 panning curve   Tim Parkhurst
• obsolescence (was Re: [sdiy] "Curtis" filter in Prophet 8)   Samppa Tolvanen
• [sdiy] small ,higher than 8 input multiplexers?   Dave Manley
• [sdiy] SSM2164 panning curve   Tom Wiltshire
• [sdiy] "Curtis" filter in Prophet 8   Samppa Tolvanen
• [sdiy] SSM2164 panning curve   Neil Johnson
• [sdiy] small ,higher than 8 input multiplexers?   Dan Snazelle
• [sdiy] Yamaha Rev7 fx processor.schematics anyone?   Bob Weigel
• [sdiy] small ,higher than 8 input multiplexers?   mark verbos
• [sdiy] SSM2164 panning curve   Tim Parkhurst
• [sdiy] small ,higher than 8 input multiplexers?   David G. Dixon
• [sdiy] small ,higher than 8 input multiplexers?   David G. Dixon
• [sdiy] small ,higher than 8 input multiplexers?   David G. Dixon
• [sdiy] SSM2164 panning curve   Jerry Gray-Eskue
• [sdiy] SSM2164 panning curve   Derek Holzer
• [sdiy] SSM2164 panning curve   Jerry Gray-Eskue
• [sdiy] SSM2164 panning curve   Derek Holzer
• [sdiy] ssm2120 replacement?   Dan Snazelle
• [sdiy] ssm2120 replacement?   Tom Wiltshire
• [sdiy] THAT Corp Application notes   Tom Wiltshire
• [sdiy] THAT Corp Application notes   David G. Dixon
• [sdiy] SPICE and Processors   George Hearn
• [sdiy] SPICE and Processors   JH.
• [sdiy] SPICE and Processors   Neil Johnson
• [sdiy] SPICE and Processors   Derek Holzer
• [sdiy] SPICE and Processors   Ingo Debus
• [sdiy] SPICE and Processors   Antti Huovilainen
• [sdiy] SPICE and Processors   Jerry Gray-Eskue
• [sdiy] SPICE and Processors   Antti Huovilainen
• [sdiy] SPICE and Processors   Magnus Danielson
• [sdiy] SPICE and Processors   Rainer Buchty
• [sdiy] SPICE and Processors   David G. Dixon
• [sdiy] SPICE and Processors   Scott Gravenhorst
• [sdiy] SPICE and Processors   Samppa Tolvanen
• [sdiy] SPICE and Processors   John Loffink
• [sdiy] SPICE and Processors   np
• [sdiy] SPICE and Processors   Aaron Lanterman
• [sdiy] ssm2120 replacement?   Aaron Lanterman
• [sdiy] ssm2120 replacement?   Dan Snazelle
• [sdiy] ssm2120 replacement?   Tom Wiltshire
• [sdiy] replacement slide switch for Roland SVC-350   Danjel van Tijn
• [sdiy] Re: replacement slide switch for Roland SVC-350   Danjel van Tijn
• [sdiy] Great weekend in Cambridge   Michael Zacherl.
• [sdiy] Great weekend in Cambridge   Michael Zacherl.
• [sdiy] Euro/Frac pots & knobs available cheap   Paul Schreiber
• [sdiy] Aaron's take on the Buchla 258 (rough draft)   Aaron Lanterman
• [sdiy] Photon Guitar Midi converter and FFT   Aaron Lanterman
• [sdiy] good books/sites for synth electronics   Aaron Lanterman
• [sdiy] replacement slide switch for Roland SVC-350   Florian Anwander
• [sdiy] good books/sites for synth electronics   Ian Fritz
• [sdiy] linear vactrol driver circuits   Julian
• [sdiy] Plastic mod-wheels   Neil Johnson
• [sdiy] Plastic mod-wheels   Byron G. Jacquot
• [sdiy] linear vactrol driver circuits   Tom Wiltshire
• [sdiy] Plastic mod-wheels   Tom Wiltshire
• [sdiy] good books/sites for synth electronics   Dan Snazelle
• [sdiy] linear vactrol driver circuits   HARRY BISSELL
• [sdiy] linear vactrol driver circuits   HARRY BISSELL
• [sdiy] good books/sites for synth electronics   BrightBoy
• [sdiy] good books/sites for synth electronics   Dave Manley
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] good books/sites for synth electronics   George P. Macklin
• [sdiy] good books/sites for synth electronics   Oren Leavitt
• [sdiy] linear vactrol driver circuits   Tom Wiltshire
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] request for help re arduino module pcb   Olav Martin Kvern
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] linear vactrol driver circuits   Aaron Lanterman
• [sdiy] linear vactrol driver circuits   Aaron Lanterman
• [sdiy] linear vactrol driver circuits   Aaron Lanterman
• [sdiy] linear vactrol driver circuits   Antti Huovilainen
• [sdiy] request for help re arduino module pcb   Paul Anderson
• [sdiy] linear vactrol driver circuits   Tom Wiltshire
• [sdiy] request for help re arduino module pcb   Olav Martin Kvern
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] request for help re arduino module pcb   Paul Anderson
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] request for help re arduino module pcb   Paul Anderson
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] request for help re arduino module pcb   Paul Anderson
• [sdiy] Simple digital ADSR?   Scott Nordlund
• [sdiy] Silly question about followers   David G. Dixon
• [sdiy] Simple digital ADSR?   paul.maddox.mail-list at synth.net
• [sdiy] request for help re arduino module pcb   Olav Martin Kvern
• [sdiy] Silly question about followers   Oren Leavitt
• [sdiy] Simple digital ADSR?   Stewart Pye
• [sdiy] DIY Polysynths   Tom Wiltshire
• [sdiy] DIY Polysynths   Colin f
• [sdiy] DIY Polysynths   Oakley Sound
• [sdiy] DIY Polysynths   Ingo Debus
• [sdiy] DIY Polysynths   Florian Anwander
• [sdiy] DIY Polysynths   GEORGE HEARN
• [sdiy] DIY Polysynths   Scott Gravenhorst
• [sdiy] DIY Polysynths   paul.maddox.mail-list at synth.net
• [sdiy] DIY Polysynths   Tom Wiltshire
• [sdiy] DIY Polysynths   paul.maddox.mail-list at synth.net
• [sdiy] DIY Polysynths   paul.maddox.mail-list at synth.net
• [sdiy] DIY Polysynths   paul.maddox.mail-list at synth.net
• [sdiy] DIY Polysynths   Ian Fritz
• [sdiy] DIY Polysynths   Samppa Tolvanen
• [sdiy] DIY Polysynths   Eric Brombaugh
• [sdiy] DIY Polysynths   Tom Wiltshire
• [sdiy] Simple digital ADSR?   Scott Nordlund
• [sdiy] DIY Polysynths   thx1138
• [sdiy] DIY Polysynths   Ian Fritz
• [sdiy] Silly question about followers   David G. Dixon
• [sdiy] DIY Polysynths   thx1138
• [sdiy] DIY Polysynths   Eric Brombaugh
• [sdiy] good books/sites for synth electronics   thx1138
• [sdiy] arduino module mission   Jason Proctor
• [sdiy] DIY Polysynths   Rainer Buchty
• [sdiy] DIY Polysynths   Mark Rivera
• [sdiy] arduino module mission   Paul Anderson
• [sdiy] Plastic mod-wheels   Adam Schabtach
• [sdiy] good books/sites for synth electronics   Ray Wilson
• [sdiy] arduino module mission   Jason Proctor
• [sdiy] MIDI inc/dec program   Tom Wiltshire
• [sdiy] Keyboard scanner   Neil Johnson
• [sdiy] MIDI inc/dec program   Jason Proctor
• [sdiy] arduino module mission   Paul Anderson
• [sdiy] DIY Polysynths   Scott Gravenhorst
• [sdiy] arduino module mission   Jason Proctor
• [sdiy] MIDI inc/dec program   Seb Francis
• [sdiy] MIDI inc/dec program   Jason Proctor
• [sdiy] good books/sites for synth electronics   Dan Snazelle
• [sdiy] Keyboard scanner   GEORGE HEARN
• [sdiy] MIDI inc/dec program   Tom Wiltshire
• [sdiy] DIY Polysynths   Carsten Tönsmann
• [sdiy] DIY Polysynths   Tom Wiltshire
• [sdiy] Keyboard scanner   paul.maddox.mail-list at synth.net
• [sdiy] MIDI inc/dec program   Seb Francis
• [sdiy] Keyboard scanner   Samppa Tolvanen
• [sdiy] MIDI inc/dec program   Florian Anwander
• [sdiy] MIDI inc/dec program   Samppa Tolvanen
• [sdiy] Keyboard scanner   paul.maddox.mail-list at synth.net
• [sdiy] Keyboard scanner   Colin f
• [sdiy] MIDI inc/dec program   Tom Wiltshire
• [sdiy] Keyboard scanner   Tom Wiltshire
• [sdiy] Keyboard scanner   paul.maddox.mail-list at synth.net
• [sdiy] MIDI inc/dec program   Forbes, William ALGLSG-LXES
• [sdiy] MIDI inc/dec program   Tom Wiltshire
• [sdiy] Keyboard scanner   Neil Johnson
• [sdiy] Keyboard scanner   Neil Johnson
• [sdiy] Keyboard scanner   paul.maddox.mail-list at synth.net
• [sdiy] Metal work   paul.maddox.mail-list at synth.net
• [sdiy] MIDI inc/dec program   Florian Anwander
• [sdiy] MIDI inc/dec program   Jerry Gray-Eskue
• [sdiy] MIDI inc/dec program   Jerry Gray-Eskue
• [sdiy] Metal work   Forbes, William ALGLSG-LXES
• [sdiy] Metal work   Mike Gorman
• [sdiy] DIY Polysynths   Antti Huovilainen
• [sdiy] DIY Polysynths   paul.maddox.mail-list at synth.net
• [sdiy] DIY Polysynths   Antti Huovilainen
• [sdiy] Metal work   Julian
• [sdiy] Metal work   paul.maddox.mail-list at synth.net
• [sdiy] DIY Polysynths   thx1138
• [sdiy] converting output from a RAM to CMOS   mark verbos
• [sdiy] DIY Polysynths   Antti Huovilainen
• [sdiy] Metal work   Mike Gorman
• [sdiy] DIY Polysynths   thx1138
• [sdiy] Metal work   HARRY BISSELL
• [sdiy] request for help re arduino module pcb   The Doctor
• [sdiy] Metal work   Byron G. Jacquot
• [sdiy] arduino module mission   Jason Proctor
• [sdiy] DSP synth applications (was DIY Polysynths)   Eric Brombaugh
• [sdiy] Metal work   Ingo Debus
• [sdiy] converting output from a RAM to CMOS   mark verbos
• [sdiy] Metal work   Oren Leavitt
• [sdiy] DSP synth applications (was DIY Polysynths)   Tom Wiltshire
• [sdiy] Metal work   HARRY BISSELL
• [sdiy] DSP synth applications (was DIY Polysynths)   thx1138
• [sdiy] request for help re arduino module pcb   Jason Proctor
• [sdiy] Metal work   Michael Zacherl.
• [sdiy] DSP synth applications (was DIY Polysynths)   Scott Gravenhorst
• [sdiy] anybody used a Freeman string machine?   Bob Weigel
• [sdiy] anybody used a Freeman string machine?   Bob Weigel
• [sdiy] anybody used a Freeman string machine?   tj
• [sdiy] anybody used a Freeman string machine?   Bob Weigel
• [sdiy] Gobs of Goods from Servo for Sale   Tim Parkhurst
• [sdiy] Keyboard scanner   Andre Majorel
• [sdiy] Metal work   paul.maddox.mail-list at synth.net
• [sdiy] Keyboard scanner   Neil Johnson
• [sdiy] Keyboard scanner   Neil Johnson
• [sdiy] Keyboard scanner   Ullrich Peter
• [sdiy] Six/6 voice synths   Tom Wiltshire
• [sdiy] Six/6 voice synths   Colin f
• [sdiy] Wave Shaper 9vt circuit??   legion at helpwantedproductions.com
• [sdiy] Six/6 voice synths   Graham Atkins
• [sdiy] Six/6 voice synths   paul.maddox.mail-list at synth.net
• [sdiy] Six/6 voice synths   Terje Winther
• [sdiy] Six/6 voice synths   Terje Winther
• [sdiy] Six/6 voice synths   thx1138
• [sdiy] MIDI inc/dec program   Ingo Debus
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Julian
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Andreas Wetterberg
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   George P. Macklin
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Tom Arnold
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Samppa Tolvanen
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Andreas Wetterberg
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   David Ingebretsen
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Tom Arnold
• [sdiy] eurorack tapped strip (in M3) source pref. uk?   Stewart Pye
• [sdiy] Six/6 voice synths   Bob Weigel
• [sdiy] Six/6 voice synths   Florian Anwander
• [sdiy] Six/6 voice synths   Florian Anwander
• [sdiy] Multiplexed Expo Converter?   cheater cheater
• [sdiy] Six/6 voice synths   cheater cheater
• [sdiy] Multiplexed Expo Converter?   jhaible at debitel.net
• [sdiy] Multiplexed Expo Converter?   Antti Huovilainen
• [sdiy] Multiplexed Expo Converter?   Tom Wiltshire
• [sdiy] Multiplexed Expo Converter?   Antti Huovilainen
• [sdiy] Multiplexed Expo Converter?   cheater cheater
• [sdiy] Polyphonic keyboard scanner   David G. Dixon
• [sdiy] Polyphonic keyboard scanner   George Hearn
• [sdiy] Polyphonic keyboard scanner   Eric Brombaugh
• [sdiy] Polyphonic keyboard scanner   Jerry Gray-Eskue
• [sdiy] Polyphonic keyboard scanner   David G. Dixon
• [sdiy] Polyphonic keyboard scanner   JH.
• [sdiy] Polyphonic keyboard scanner   Ingo Debus
• [sdiy] Polyphonic keyboard scanner   Dave Manley
• [sdiy] Polyphonic keyboard scanner   Tom Wiltshire
• [sdiy] Multiplexed Expo Converter?   Scott Nordlund
• [sdiy] Six/6 voice synths   Scott Nordlund
• [sdiy] Polyphonic keyboard scanner   Mike Gorman
• [sdiy] Polyphonic keyboard scanner   Veronica Merryfield

Last message date: Fri Jul 31 23:29:44 CEST 2009
Archived on: Tue Jun 3 23:33:57 CEST 2025

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...