[sdiy] replacement slide switch for Roland SVC-350

[Florian Anwander]

Hi Danjel

> I am fixing an SVC-350 vocoder for a friend. The only problem with it
> is with the Instrument Level 3 position switch (-30db -15db 0dB). When
> it is in the 0dB position it is very intermittent signal. I tried some
> Dexoit in the switch but it did not fix the issue so I probably need a
> replacement.
Did you check the soldering? Maybe it is not the switch itself, but a 
cold solder joint where the switch is soldered to the pcb.

Florian