[sdiy] tl ic question

[George Hearn]

>For the mankato filter I need for instance tl074BCN but the store where I
order stuff only has the : TL074CP ... Is it ok to substitute it ?

TL071 has 10mV max voltage offset.  TL071A has 6mV and TL071B has 3mV.  For
a lot of stuff this is insignificant but applications where DC accuracy is
important use the 'B' graded TL071/2/4 etc.  Lower offset also usually
implies lower offset voltage drift (time/temperature)  George.  

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Derek Holzer
Sent: 11 July 2009 10:57
Cc: 'synthdiy DIY'
Subject: Re: [sdiy] tl ic question

Dave Manley wrote:

> M=military temp -55+125C

Must be nice to know that if you built your synth with the right 
components, you could bake it, boil it, freeze it or shoot it into orbit 
with no ill effects... ;-)

D.

-- 
::: derek holzer ::: http://blog.myspace.com/macumbista ::: 
http://www.vimeo.com/macumbista :::
---Oblique Strategy # 33:
"Cluster analysis"
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy