[sdiy] Fine pitch etching (was: For breadboard lovers...)

[Jerry Gray-Eskue]

HELLO....

If you are not familiar with these guys you should give it a look.

They are claiming to have the Toner Transfer down to an art with one try one
board results using their Starter Kit and Laminator.

If you dig around there is an interesting write ups on the transfer process.

They also have other products and uses posted such as White (and Colors)
Silk Screen transfers from Black laser printers suitable for Panels. I did
not find any claims on Durability of these Panel Transfers but hard clear
top coating is still an viable option.

Interesting stuff If I had some free cash I would be giving this stuff a
trial run.

I second the question, anyone out there had experience with these products?

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl]On Behalf Of Andy Eakin
Sent: Friday, July 10, 2009 10:40 AM
To: Synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] Fine pitch etching (was: For breadboard lovers...)


Ullrich Peter wrote:
> I etched boards on my own with downto 0.5mm pitch.
> I work with "DIY films" from laser printers - I stack two films for higher
contrast.
>
> No problems!
>
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Danjel van Tijn
> Sent: Thursday, July 09, 2009 2:00 AM
> To: synthdiy DIY
> Subject: Re: [sdiy] For breadboard lovers...
>
> you can etch your own boards with that fine pitch? I would be
impressed....
>
>
> cheers,
> Danjel

Speaking of fine pitch etching has anyone had good success with :

http://www.pulsarprofx.com/pcbfx/main_site/pages/start_here/index.html


His system seems to be well thought out (if not a bit expensive)
however his results are excellent.  My only concern is his web site is a
little over the top and comes off as an infomercial.

I am strongly considering moving to this system once I get a bit deeper
into DIY-PCBs.

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy