[sdiy] Fine pitch etching (was: For breadboard lovers...)

[Andy Eakin]

Ullrich Peter wrote:
> I etched boards on my own with downto 0.5mm pitch.
> I work with "DIY films" from laser printers - I stack two films for higher contrast.
>
> No problems!
>
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Danjel van Tijn
> Sent: Thursday, July 09, 2009 2:00 AM
> To: synthdiy DIY
> Subject: Re: [sdiy] For breadboard lovers...
>
> you can etch your own boards with that fine pitch? I would be impressed....
>
>
> cheers,
> Danjel

Speaking of fine pitch etching has anyone had good success with :

http://www.pulsarprofx.com/pcbfx/main_site/pages/start_here/index.html


His system seems to be well thought out (if not a bit expensive)
however his results are excellent.  My only concern is his web site is a
little over the top and comes off as an infomercial.

I am strongly considering moving to this system once I get a bit deeper
into DIY-PCBs.